Hello everyone, Welcome back to geardo,
Today we will show you how to replace the charging port board on the Samsung Galaxy A12 Mobile Phone.
To start, we need to have the right tools to proceed with the repair,
which You can find in the description.
First, turn off the phone, take out the Sim tray, and follow the back cover removal.
To remove the back cover, create a gap near the sim slot or charger
port using a picker or card pry tool. Insert the card pry tool and gently
move around the phone to release the plastic clips on the frame.
Be gentle when taking out the back cover; the fingerprint sensor is attached to the back cover.
Next, take out the logic board cover by undoing six screws.
And then, disconnect the battery & fingerprint plugs. Now, the back cover can leave from the
body. '
Next, move to the bottom and take out the board cover by undoing seven screws.
Next, take out the not-working charging port board
by disconnecting the LCD Plug and the antenna head.
Next, Place the New charging port board in
the body and secure the lcd plug and antenna head into the board.
Next, place the board cover by adding seven screws.
Next, connect the battery and fingerprint plugs into the board.
And then, secure the logic board cover by adding five screws.
Finally, Snap in the back cover and run through the
sides to secure the clips. And Also, Do not forget to add the sim tray.
I
hope you have enjoyed the replacement guide on Galaxy A12.
Let us know if you have any questions; please like, share, and comment on our videos.
Do not forget to hit the subscribe button.