Welcome to the Hydraulic Press Channel.
Today we are going to try
to turn sand
back into the rock.
And we are going to use
of course
the Hydraulic Press.
And then our new tool,
RockMaker Five-Million
And the idea is to
place some sand here in the cup
and then crush it with this tool
which is quite small in diameter
so we are going to reach huge pressure
which is
this amount in numbers
I will do some calculations.
And after the sand, we are also going to try with the salt,
and ash.
So, I think it's going to be quite interesting to see how the new tool works.
And let's start with the sand.
So, I put some sand now here.
Yep, and then we are just going to line it here, on the center of the tool.
Yep, and I have like, uh
0.3 millimeters
of slack there, so it won't get stuck so easily
if I made it like
really tight fit
And now I'm going to use the press
to use full force
and then we are going to go behind the blast screen, and
crush the sand.
Yep, now everything is ready
And here we go!
Oh, ya!
Sand smoke.
Yeah, that's ready.
Let's raise the tool up.
Yep, it doesn't look good...
We need hammer.
Uh, oh.
Uh, yeah, I think I'm going to open the bolts.
And...
Yeah...
Let's take it down from here.
Yeah, so we, uh, used full force
And we have some problems, this won't come out.
So I'm going to open these bolts
So we can take this apart
And then this should be
Remove it with this
But, it's also stuck.
So...
I think the tool is little bit too small, for the force.
So, it kind of gets destroyed.
But, I'm quite sure that we can get it open.
Yep, now it's starting to open
I think I'll go away from my milling machine
I don't want to get sand here.
Yep, so we have only the last bolt here.
And then these two parts
are
released
and we can see the
sand rock that we made from, like
under the
under the Press
It's really exciting.
Ta-Da!
It's actually is rock.
Check.
I've got the...
bolts out here.
I take this away.
And then we can
press it from this direction.
So the rock and tool come out together.
If the rock doesn't break.
Might be a little bit hard.
Yep, and I'm going to
split the table open from the press
Then this fits here
Like this.
And now we can press from here
and then everything goes down.
I'm bit worried that the stone will break.
This tool didn't
meant to be stuck here.
so we could just
press it like this way, really short.
Short distance, but now we have to push the tool away.
And the rock also,
I think this isn't too hard for this.
That.
But,
but it sure is rock now.
Yep, so this is about, uh,
2 millimeters smaller than the hole in the
RockMaker Five-Million
And I place
this right here, and then we are going to just press it
through and everything is free.
And
this is probably closest
to like real Press job
on this channel, ever.
Getting parts that are stuck free.
And if you want to see more of stuff like that
I have some
On our second channel, where is like, uh,
real work with the Press videos.
Yep, it's coming out.
Yeah, that went down
I think we are going to get the rock out.
I put these together, and then we make some changes.
'Cause I don't want to drop the rock so high.
I put this here.
Yep, so now we have quite good view
and you should be able to see when this pushes the rock out.
I just line this
Heh!
Done!
Yes!
There is some loose sand on the rock
but I think I'm going to
little bit blow it with the air can
let's clean this and have a look at our
self-made rock.
Yeah, so here it is.
It feels quite hard.
But there's always, like, stuff falling out from it.
So I'm not
I'm not completely sure how hard it is.
Let's try, hit it, slightly.
It's like
It's surprisingly hard.
Anni, do you think?
What we should do with this?
Shall we crush it?
Yeah, we are going to crush it.
I take this away so I don't break this.
It was quite easy to crush.
And, really interesting
I just, uh, slightly crushed it
and now it's completely
back to the sand
So...
In this video, we turned
Sand to rock.
And then back to the sand.
And we used about two hours of our lives doing this.
And I think we managed to do something, because this is now much finer sand.
Than on the beginning.
So, it isn't completely pointless.
But, quite pointless.
And I'm going to make some upgrades for the next video with the RockMaker Five-Million.
I will cut
this like, into four slices.
And then I'm going to add super ring around this.
So, then we can, like,
raise the super ring
open the bolts
And...
slice this
to like, four different direction.
So then our tool doesn't get stuck, and we don't have to like,
do all this work.
My bolts were too long, they didn't come out
with the tool, so I had to cut them
and there was like really a lot of work
getting the tool free.
Yeah, but
I think it worked, we made the rock.
So...
That is all for today.
Thank you for watching.
And, have a nice day.
And, for today's extra content,
we have this Hipster Snail with Mustache.
And it can attack you by telling about expensive beers and fixie bikes.
So, we have to deal with it.
Before that...
At least the mustache survived.
So Anni can add those to other animals in future videos.