Hey, DIYers.
I'm Jorge from Alarm Grid.
Today, we're going to be going over the 5828 volume control.
So the 5828 is a bi-directional keypad
that's usually used on LYNX touch panels,
so the Honeywell all-in-one systems,
and Vista systems that have a transceiver wired into it.
So whether it's a 5881ENH or it's a 6160RF.
These keypads do work with the Honeywell
wireless all-in-one systems, but the Lyric
would be the only one that it doesn't
work with because to connect to the systems,
it does require a house ID code, which the Lyric does not use.
So it's just something to keep in mind.
This keypad cannot be used with the Lyric controller,
only with the LYNX Touches--
so, for example, the L7000, the L5210, the L5100, the L5200.
So just basically the LYNX Touches and Vista
systems with a transceiver wired in.
So this keypad, I actually have it learned into my L7000.
So it doesn't-- let me show you guys real quick.
I can actually arm from this keypad,
and it'll make the system go off.
So if I enter in my master code, one, two, three, four,
and then the number two, it will make the system arm away.
And then if I do one, two, three, four, off,
it'll actually disarm the system.
So right now, I actually locked myself out of that
because before the video I was entering in codes.
And I did want to show you guys just how to do the volume
control on this.
All So for the volume, you actually
press the pound, which is the function, the number two, which
is for volume, and then if you see
right next to three and six, you have an up and a down arrow
key.
Well, that's giving you your command.
So you're hitting the function button, the volume, and then
you can either higher or lower the volume on a 5828.
What a highering or lowering the volume is going to do is it's
going to change the level of the sound for the button presses
and for the arming confirmation dings.
So you can actually-- anytime you hit the three or the six,
you're just going up or down by one level.
And you have to enter in the code
again if you want to go down another level.
So for instance, if I--
right now, I believe I have it set to the lowest volume
possible.
So let me go ahead and take it out of sleep mode.
If you don't have it plugged into a power adapter,
the LCD goes blank, and you have to press and hold
a button in order to enable it again.
So I just press and hold star.
Now that I'm here, I'm going to go ahead and hit pound, two,
Check.
And three.
It's going to give me a check, and you're
going to notice that check gets louder the more I
do that pound, two, three.
So if I do it again to raise the volume one more level--
Check.
And I can do it again.
Check.
And one more time.
Check.
So you see, it's going to keep going up until it
reaches a certain point.
You'll be able to notice if you're
trying to raise the volume up higher and higher,
you know, it's not going up any higher,
then you've reached the max.
If you're doing vice versa, if you're lowering the volume
and it doesn't go any lower and it
keeps saying the same check at the same level,
then you've hit the threshold for that as well.
Now, one little important thing when
you are doing this, as you saw, when
I was doing the pound, two, three,
it is reading in those button presses at the actual panel.
So usually after you enter in a bunch of numbers on the system
or on the keypad and the system doesn't do any action,
the system just thinks it's someone
trying to enter in random codes into the system
to figure stuff out.
So it'll actually lock you out of the keypad, which
is why on my L7000 right now I'm getting a user error code
error.
What is it?
Yeah.
User code error.
Because I was lowering and raising
the volume before the video, so it locked me out
with all the button presses.
But again, I demonstrated the going up.
Same concept going down now.
Pound, 2-- sorry.
Got to power it on.
You hit pound, two, six--
Check.
--to go down.
And again.
Check.
And you slowly--
Check.
--you slowly start hearing the sound fade a little bit out.
So it's not as loud as just a second ago.
So that's basically how you're going to control the volume.
You always hit the function, the volume, and then three or six
to go up or down.
Now, that is just a quick video on how to adjust
the volume on the 5828.
The same concept if you have a 5828V.
So for the voice, it's the same concept.
And if you guys do have any questions,
feel free to email us at support@alarmgrid.com.
If you found the video helpful, make
sure you hit like underneath.
Subscribe to the YouTube channel,
and enable notification so whenever we upload new content,
you guys are notified.
Thank you, and I'll see you guys next time.