what's up everybody welcome back to my channel today we're going to be seeing if the parts are
interchangeable between the expensive otterbox and the clone case from allcase let's check it out
so i've been using both these cases for a while i kind of just swap around as you can see i
kind of always have cases and i'm changing them all the time and depending on what i'm doing i'll
pick a case that best fits that activity one of the things that i had someone asked which was a
great question is are the parts interchangeable now i've already tested the holsters and they
fit but i wouldn't recommend it they don't snap in too well i think the tolerances are a little
bit different different between the two but everything else looks really really similar
i'm going to swap out some parts and see what happens so but first before we do that
i just want to show you the fits and how they go together normally when i have an otterbox case i
find one of the flaps and i just pull it apart open up the frame and the inside
pop it in
snap everything on the frame okay every plastic
work your way around the edge take a random screenshot because you're pressing all the buttons
now i know i didn't use the otterbox just now but the installation is pretty much exactly the
same the fits really well plastic's nice and the rubber on the back is nice and tight all
the buttons are clicky not going into a full review on this so i'll link the video above
but it's if you've ever used one of these before this will feel very familiar
and just for comparison we'll do the same thing with the defender pro
so i do the same exact thing i flip grab a flap pull the outside off i do feel like the
plastic on the inner frame and this one is a little bit nicer on the defender
it goes on the exact same way and you have the otterbox case everyone knows and loves
these things are identifiable from a mile away you can always tell when someone has an
box case and they care about their phone and it working over
the aesthetics well i do think these look good but clearly these are function over form now
let's see if the parts swap so these are the way the frames go let's try and throb them
and they do not fit you can see that the tabs don't line up correctly so that's not going to
work just for the heck let's try the other one to see if there's something i'm doing wrong here
yeah you can see there's a snap up top that's not here so the the tabs that snap it all together do
not line up correctly you will not be able to swap the inner frames now what about the rubber
outside i wonder if those will swap so let's take the defender pro inside and the all case outside
and see if they'll go on and clearly is going on the charging port tabs are a little tight
it has these extra little pieces of plastic on there but i feel like if you trim those
off this would go right in the tolerances are not the same around the edges over here
so i mean it fits but it's not it's not pretty it's not something i would want
to daily drive around um i guess if you wanted to clip these off you could do it
but i noticed the the rubber does not line up perfectly along the edges here
so you're not going to use this very well let's let's try it the other way
so let's try the all case interior with the otterbox exterior
this seems to have a better chance of potentially working once i'm sure i can get it on we'll try
it with with the phone in there so yeah it does fit it's not good looking um but uh
it will probably work let's put the phone in there and try it out
so it goes on starts to go on pretty well but you can see that the frame is not big enough
and that there's a little bit of extra play in the corners when you try and swap the
exteriors here and the rubbers don't want to fit into
the appropriate places very well but i mean if you were in a jam and you did have both and you
lost you know didn't have all the parts to make a complete case one way or the other you could
probably get it to work the buttons click you can't access the ports
but doesn't feel very good and i keep having to redo this top here you can see the tolerances are
off not something i'd recommend so would i do it no could you maybe if you don't care about
things like this up top so i know this was a random quick little video but the question was
asked and i was kind of curious myself so thanks for interacting and drop in the comments below
if you're new to the channel i'm always looking for ideas and new videos to do so feel free to
let me know in the comment section below something you'd like me to check out if you
have some kind of weird permutation or something you'd like to try out a case an accessory
some kind of electronic let me know i'll do my best i appreciate each and every one of you
guys subscribing i'm trying to get to a thousand subscribers as quick as i can so please smash that
button if you liked the video hit the thumbs up if not the thumbs down works as well peace
you