Hi, DI wires.
This is Michael from Alarm Grid.
And today, I'm going to be showing you
how to add a wireless zone to a DSC PowerSeries Neo security
system.
And when I say wireless zone, I basically mean a PowerG sensor.
A wireless PowerG sensor.
Because those are the only wireless
sensors that the DSC PowerSeries Neo is capable of supporting.
But in order to use wireless PowerG sensors with your DSC
PowerSeries Neo security system, you
will need to add a PowerG transceiver.
Now you have a couple of options available.
In our case, we have a DSC HS2LCDRF9 N keypad,
which is a great initial alphanumeric keypad
for the system.
It includes a built-in PowerG transceiver.
Since it's an alphanumeric keypad,
you'll be able to use it for programming your system.
And the fact that it has that PowerG transceiver,
it will open up a bunch of possibilities for you
to add wireless sensors instead of just restricting you
to hardwired sensors that you would
wire in with the system or an expansion module.
The other option is to use a DSC HSM2HOST9 standalone
transceiver module, which can be a good option if you already
have an alphanumeric keypad setup with the system.
And I also just want to briefly mentioned
on PowerG sensors in general.
They have a fantastic range.
With the Neo, it's actually two kilometers away
from the PowerG transceiver in an open air environment.
Now keep in mind that thick walls or large metal
objects can reduce range.
So if you're having range issues there
is a DSC PG9920 PowerG repeater, which can effectively
double the range.
So that's pretty useful.
But when you're adding a wireless zone
to your Neo system, you'll be using PowerG sensors.
So I'm going to go on to our keypad
here and show you the process for enrolling a new wireless
zone with your system.
We're going to start by entering star
eight to get into programming.
And then we need to provide our installer code to gain access,
which ours is at the default--
5555.
And now we're asked to choose a programming field.
We're going to choose programming field 804.
And it gives us the option for auto-enrollment.
We can confirm that by pressing the star key.
And now we need to auto-enroll our sensor.
So we have our PG9914 motion detector here.
And just as a reminder, different PowerG sensors
use different methods for auto-enrollment.
So be sure to look up the installation
manual for your PowerG sensor to see how it auto-enrolls.
A lot of them just require you to insert a battery.
In this case, we actually have to do an enrollment
button, which is there.
I'm going to turn it over here so you might
be able to see it a bit easier.
And so we're going to insert our battery to power on the sensor.
And then we're going to press and hold the enrollment button
until we get an orange LED light.
And I inserted the battery backwards.
Yeah, this was the proper way it goes.
Because I turned it around.
I wasn't paying attention there.
So we're going to press and hold the enrollment button now
and get the orange LED light.
And there.
It did recognize the serial number on the screen.
And so we're good to go.
We're going to confirm it by pressing the star key.
And now we're going to choose a zone number for the system.
It's going to automatically give you the first wireless
zone available on the system.
In our case, that's zone 009.
We're fine with that.
But if you wanted to enter in a different three-digit zone
number, you could certainly do that.
But we're just going to confirm by pressing the star key.
And now we're choosing our zone definition.
Since this is-- we'll call it an interior motion sensor.
We're fine with interior.
If we wanted to scroll between different options,
you can see them here.
If you aren't sure about zone definitions,
then refer to the DSC PowerSeries Neo Security System
manual, which will have a complete list of zone
definitions.
Remember, this is how the system will respond
when the sensor is faulted.
So it's very important that you get the proper zone definition.
And we're fine with 004 for an interior sensor,
so we'll press star to continue.
And now we're choosing partitions.
The Neo is a multi-partition system.
You can scroll between different partitions using the arrow
keys, and you can toggle Y for yes and N for no.
We want ours to be on yes for partition one,
and we want the others to be all no.
So we'll go with that.
And then in this case, we press pound to continue, not star,
because star is to toggle.
So we'll press pound to go to the next one.
And now we're programming our zone label,
which is the name for the sensor that you're enrolling.
In our case, we have it set to better in motion.
You can use the arrow keys to move the cursor at the bottom
to different options.
We're going to go and clear these out.
I want to briefly show you how to do that.
So you get it under the letter that you want to clear,
and you press zero to delete it.
And see, we're deleting the letters one by one.
We're getting rid of motion.
And we're going to go back to bedroom here.
We're just going to wipe it out completely
so we can start with a fresh zone label.
And so, to get started out with a fresh zone label
once you have it completely cleared,
you can press the star key, and then
it will give you the option for word entry.
And you press star again.
Now options one through 193 are actual words.
And options 194 through 238 are letters and symbols.
So I just recommend finding the actual words that
are close enough to what you are looking
for that meet your definition.
And then just setting it the way you want.
So how about we aim for kitchen motion?
Let's go with that.
So I'm going to just ballpark it here.
And these are expressed in three digits,
so let's try 090 and see where that gets us.
That got us to heat.
Not quite kitchen.
So let's try 110.
Lights.
So that's a little bit further than we want.
So let's backtrack a little bit.
And there, I saw kitchen right there.
104.
So we have kitchen displayed.
It's option 104.
We'll press star to confirm that.
And then we have kitchen here, and we
want to make it known that it's a motion sensor.
So we'll do another one.
And luckily, I happen to remember the one for motion.
It's 125.
And there.
So we have motion displayed there.
We press the star key to confirm.
And now we have kitchen motion.
It's exactly the way that we want it.
So once you have the zone label perfectly configured,
you can press the pound key to finish.
And then it will have you enroll the next zone, which
we don't need to do that.
We're just going to press pound repeatedly
to get back to the main screen.
And now our PG9914 is enrolled with our DSC PowerSeries Neo
security system.
So that's how you add a wireless zone to a DSC PowerSeries Neo.
If you have any questions about the Neo system
or about PowerG sensors or about alarm monitoring in general,
please send an email to support@alarmgrid.com.
If you found this video helpful, make
sure to give it a thumbs up below to like the video.
And remember to subscribe to our channel for updates
on future videos.
We hope you enjoyed the video.
Thank you.