Hello, assalamualaikum warahmatullahi wabarakatuh, see you again with the Black Builder ID channel
, the reference channel for do-it-yourself. Let's make our own friends, this video, I
want to review this, here is the downlink if this meaning is used to help us make it easier to
make wooden connections using double, that's good, we want connect the board or make a
T-shaped connection or maybe a tea shape like this Yes ok How to use it watch
this video until it's finished let's execute this is first a dog where this is the front
view then the side view is the back and this is the front view this is the grip yes and at the bottom
here there are fans and these can be removed Hi then here there are three holes to drill to
make holes intended for starting here there are sizes 8mm 10mm and 6mm
this if we open it and later for the fans this is that I'll show you There are two ways to use
the link leaf, yes and for the ingredients of this tool it has ABS plastic, it's very strong Hi and
this number one is highly recommended, yes, OK. Then for the back here
, it will be used later to adjust it to the position of the drill that we installed earlier and the
boy, we already burped, we'll make the position even. he's here so this is it.
Let's just say that the slang that has been installed is important for the direction or position of the
next drilling it's accurate then with the Cikini downlink we can make it the
first three hole sizes. Earlier it was six 10 and 8 millimeters. So, how to make holes in these three sizes, that's it
different, yes, the way is like this, so if for the 6 millimeter size it works, we
Hi Taro like this, yeah So later for the hole it will be center like
this as well as the 8 millimeter size like this then like this Now for the 10
millimeter size yes you can take advantage of these 4 episodes like this like this or like this or like this
so roughly and we can also use Eh, yes, the fans are like this, let's determine
the size of the fans under, we work like this, yes, because OK, we
will try to connect these two wooden boards like this by using a dawet as part
The essentials for sowing are on this side and on this side, ok, let's make a pomfret hole
in the wood. First, the method is Hi. For practice, this time I used
a daul of 8 millimetres, which Regina will try here and for the drill bit, don't forget to
use a stopper. Yes. So later for the da'wah position, if possible, half and half
of the length of the hook like this here and that means when we are drilling
we have to measure the position of the drill bit stopper like this and here it fits in
I am trying for the position here, then we board
in Indonesia Deni for the first hole,
hi, then actually after this we want to install a double here and
don't forget we give glue first, but for practice this time
I don't use glue so this is what we put on first, the prayer is Tining ok
Oh yes, after the leaves are installed we will drill
the wood, the only problem is that we have to use the fans
for the fans, I already have plug it in. So, to make a hole in the other wood, we can
use this, here we go, we enter this and make sure for the position of the garsini so it
's in the middle, let's start from here, I enter it like this and for the daul position
in this wood, it will be the same with the wood next to it, for the picnic, we drill which
is actually even better if this is claimed, yes, oh yes, this is when the hole for the second kayak
has been made, then we will connect the two like this, like this, we remove
this effect, we attach it Just wave it and the result is perfect here hi hi Hi then we will
try for elbow joints yes oh yes so go with Cikini leaves with n the connection uses
if the connection uses a double, we make the connection neat because it
doesn't look like the connection, but it still gives good strength
to the connection and for the next experiment we will make an elbow joint
like this by using a double up, we will So, first of all, for
the side of the wood, we will make a taqwallah hole, so here I want to determine the
middle position. Well, we can also give a line first here to determine the middle position. After
that, we will suit this yellow one. it fits right in the middle like this
Hi, it can be like this here, the file is good, this is right. Hi After that, we have the fans. Tighten it,
hi, hi, hi, it's like this, so when we drill every time,
Hi, we want it to be good. let's soak it, let's install it first
, it's installed on the side a little bit here, the comments are still the same Also, yes, Nusa, we installed
my racing first, so we just estimate the depth, then the second position
we make on this side of the pants is approx
. here it's like this
actually it will be very helpful, yes if we use the move wall so
there is a PIN but I don't have it but I will try to
install it here It's neat I don't have a move well so I use
the manual method so I like this way right, right now, right here, right
here. Now, automatically, I put a mark here for the side
here, spread it here, cry, six signs, here, the end here and the end here, let's go,
then these two lines that I made, I connected them with an angled ruler like this it
's clearer here earlier here Oh yes Connect this set Then to determine the point
Hey I'll match this position Come on let's not it's down, right here, I'll match
the ends. Then in this section we determine the middle point. Here
Hi, use a dowling, make another one, we'll just see if you guys are in the middle
. After that, we board so don't do this for the bird, don't tell me it's
too deep, so it won't penetrate your jacket. Let's make sure it doesn't look
enough in the middle, so don't let it seep through. The
other I Max, we try to combine this with this, the position was like
this, so it's like this Hi by KK, let's try it, let's cut it first thought like this
Noah, we can have one bank
, now this is the result for the side of the floor
horizontally, yes, it will be even better if you use glue.
Oh, yes, this was our experiment using leaves
. or between wood and then unite the two gentlemen
like this and this is very strong, yes I haven't given it yet, give me wood glue maybe if
we get it with wood glue it will be even stronger and this is perfect
Hi So in conclusion the Cikini leaf is a simple but very useful tool
to help us or make our work easier to make wood connections using
a double yes For friends who are used to using severance pay
there's nothing wrong with this wood , it's owned because I think it's highly recommended
OK OK thanks for watching my video don't forget to subscribe like and share and
turn it on with trade, don't know our next video, see you on hi hi