(soft music)
- [Narrator] Change is inevitable,
especially when it comes to maps.
It can seem like every day a new street or exit
crops up on your commute.
That's why Hyundai offers MapCare
which gives 2018 and newer Hyundai vehicles
three years of complimentary annual map updates.
Some newer vehicles may have updates even more often
when they have an active Bluelink account.
These vehicles get map updates every six months
which you can install yourself.
If your eligible vehicle
is linked to your Bluelink account,
you will be notified when new map updates are available
and you can install the update.
Installing the update can be done at home,
And while a MyHyundai account is not necessary,
it's recommended that you have one.
You will then need an internet connected computer
that can write to the memory device you will use.
Go to MyHyundai.com,
then select "Learn more"
at "Update your vehicle with the latest map update".
On this page,
you'll have three different actions you can perform.
The Notifications section shows any updates available
for your vehicle.
If a navigation update is shown,
selected it, then select the update.
Here you can see the changes the update will make.
It also outlines the necessary type of storage device
you will need for the update, depending on your vehicle.
You can also confirm if your vehicle is on the list
of eligible vehicles for the download.
(soft music)
Once you've determined if your vehicle has an update,
select Update Guide,
The Prepare for Update page
will provide any further recommendations
for the storage device.
The Navigation Updater Download page
is where you'll download the update or program
for your computer.
Be sure to note the requirements
for the device you're using.
Follow the directions outlined here to install the updater.
Once installed, you can log in using your MyHyundai account,
or you can use Guest Login.
Then follow the steps on the updater to find your vehicle
and download the update.
(soft music)
You can also order a memory device to be shipped to you,
which will have a cost associated with it.
To do so select Shipping Order Website
on the Navigation Updates page
and follow instructions to purchase a memory device
with the map update on it.
Once you have the update on the appropriate storage device,
go to your vehicle.
Start your vehicle and do not turn off your vehicle
until the entire updating process is complete.
Then press Setup, then General,
then SW Info/Update.
Insert the USB drive into the USB data port in your vehicle.
See the owner's manual
to find out which port is the USB data port.
For vehicles with an SD card slot,
remove the SD card currently in the slot
and insert the SD card used to download the software.
Then press Update on the screen.
Follow the instructions on the screen.
Depending on the total data amount,
the update may take from 20 minutes to one hour.
Be certain not to turn off the vehicle, system
or remove the storage device
while the update is in progress.
Doing so may damage the data or cause a system malfunction.
Once the update is complete, you'll be ready to go.
For more helpful information on your Hyundai,
be sure to explore the how-to guides
on the HyundaiUSA YouTube channel and MyHyundai.com.
(soft music)