I received another package from ANYCUBIC
This time something other than a printer
Let's see
This is ANYCUBIC Wash & Cure Plus
As always well packed
large container for water or isopropanol
the container holds all large 8.9 inch platforms
And large prints: 192mm x 120mm x 245mm
power cable
basket in which we place the platform with the printout
a rotor to help clean the printout
rotates while washing
It's worth reading the instructions
it is probably the only washer with moving UV light
the object will also be illuminated from above
tools
print hardening platform
reflector
we can set the time from 1 to 60 minutes
let's switch between washing and curing
to check the devices, we have to print something
but what?
now we don't have to wash it by hand
the entire platform with the printout will fit into the container
we pour water or isopropanol
we are closing the container
we set the time to 2 minutes
at the top we can see how the rotor in the container works
we leave the platform to dry
we close the container and leave it until the next time
we put the platform needed for cured
we switch to curing and set it for 2 minutes
the cover protects our eyes from strong UV light
the lights are turned off when the cover is removed
it is a very safe solution
the printout is clean and hardened
quickly and without getting dirty
ANYCUBIC Wash & Cure Plus you can buy from the link in the description
you'll see this printout in the next video.
see you on Friday