Hey guys, we've still got this Boss 302 Mustang in the shop.
If you've been following us, we've washed it, clayed it and now we're moving on to the
polishing steps.
This is a beautiful black paint job with a nice vinyl graphic that breaks it up.
If you get close you can see the scratches and swirls because black shows any kind of
imperfection.
Especially up here where people grab the door handle there are scratches and swirls from
improper drying techniques.
So, I'm going to show you how quick and easy it is to remove that using the TORQ R Rotary Polisher.
Rotary is a lot faster than a dual action because it is more precise but it is also
more dangerous so you have to be certain of what you're doing so that you don't harm the
paint.
Now, whenever using a rotary you can't go over body lines, so I've taped off this edge
here where the paint is thinner.
If you go over that edge with a rotary there is a chance that it will burn or mar so we
have taken the precautions to make sure we don't damage the paint finish.
I'm going to use VSS Scratch & Swirl Remover to break down those fine scratches and swirls
to bring back the black paint.
We'll start by shaking up the bottle.
Since we are working in a small section I'm only going to apply three dime size drops
to the pad.
I'll also spray the pad with Pad Conditioner to reduce some of that friction.
This is also lubricating the pad to insure a nice polish affect.
I'll blotch it out just like we do with all of our polish jobs over the area we are working on.
On the lowest speed setting we are going to spread it out over the section then we're
going to go to speed setting four to work this into the surface until it has gone clear
and that is when we know we have refined the paint job.
Well there you have it, you can see that the TORQ R did an amazing job of taking care of
the scratches and swirls.
It did it faster and more precise than any dual action could have.
Now there is a nice reflective surface, the black is really deep and glossy.
Using VSS broke down the fine scratches that were in the clear coat to reveal fresh paint
and after further refinement it added a high gloss shine.
The TORQ R Rotary Polisher is a great machine for taking out deep scratches and swirls or
just reviving paint faster than you could have done with a dual action polisher.
You have to know what you're doing because these machines won't stop.
They can take out scratches and swirls but they can still burn or mar paint or ruin edges.
So you need to be super careful of what you're doing and keep the pad completely flat at
all times to prevent a hot spot which causes holograms.
Also, you may have noticed that this machine broke down the polish faster than a dual action.
It went clear very quickly and that is because it spins much faster which is how it corrects
paint so quickly.
I'm going to finish off this vehicle, I'm just giving you guys a small before and after.
You may have noticed that using a halogen light gives a warmer glow to show the imperfections
but you can still use LED or natural light to get the best results.
If you want to learn more about these products go to our website chemicalguys.com.
If you like this car or this video be sure to give it a thumbs up.
We'll see you next time right here in the Detail Garage.