THIS VIDEO HAS NO AUDIO
[How to Remove and Replace the Developer Kit]
[HP LaserJet Managed MFP E72425, E72430 Series]
Unpackage contents as shown.
Unfold protective plastic as shown.
Power machine down.
Disconnect power cord.
Open front panel door.
Open access door.
Remove protective cover.
Disconnect cable where indicated in yellow.
Remove screws where indicated in yellow.
Remove cartridge as shown.
Do not touch area indicated in red.
Open new parts as shown.
Place cartridge on protective plastic.
Remove screws where indicated in yellow.
Remove end cap as shown.
Set aside.
Disconnect wires as indicated in yellow.
Detach wires as indicated in red.
Remove screw as indicated in yellow.
Flip grey panel flap up.
Remove screw as indicated in yellow.
Return grey panel flap.
Remove cartridge as shown.
Throw it away.
Unbox new cartridge as shown.
Remove blue tape where indicated in red.
Turn cartridge over and continue removing packaging.
Remove packaging from end cap as shown.
Remove protective tape
Place cartridge on bag.
Fold A-shaped piece legs up at the angle.
Fold end piece up as shown.
Remove protective backing as shown.
Fold ends together as shown.
Place funnel as shown.
Squeeze bag to mix contents.
Cut bag open.
Pour contents of bag into funnel as shown.
Gently shake to get all contents into cartridge.
Tilt to make sure you get all contents into cartridge.
Replace funnel as shown.
Continue pouring bag contents into funnel.
Shake and tilt until all the contents are in.
Remove funnel and gently shake cartridge to fill.
Replace funnel as shown.
Continue pouring bag contents into funnel.
Continue shaking and tilting until contents are in.
Remove funnel and gently shake cartridge until full.
Replace funnel and continue adding contents.
Remove funnel.
Wipe down cartridge to remove debris.
Remove back from seal as shown.
Place seal on cartridge as shown.
Remove protective tape as shown.
Replace cartridge from side as shown.
Reattach wires as indicated in red.
Reattach cable as indicated in red.
Reconnect wires as indicated in yellow.
Lift gray flap up as shown.
Replace screw where indicated in yellow.
Replace gray flap.
Replace screw where indicated in yellow.
Replace end cap as shown.
Replace screws where indicated in yellow.
Replace cartridge in machine.
Replace screws where indicated in yellow
Reconnect cable where indicated in yellow.
Replace protective cover.
Close access door.
Close front panel.
Reconnect power cord.
Power machine back on.
Fold protective plastic as shown.
[Find HP online: hp.com/SupportVideos]
[hp.com/SupportForum YouTube@HPSupport]
[Facebook@HPSupport Twitter@HPSupport
[HP]