Welcome back to Detail Garage.
Today we have a special treat, we have a brand new Nissan GT-R here in the shop.
Now the owner of this car likes to keep his wheels clean.
On his older cars he didn't keep them so clean.
The brake dust chewed through his wheels and destroyed them in just a couple of years.
So if you don't take care of brake dust quickly enough
not only does it not look good
it can actually start to corrode and degrade the actual wheel.
It will destroy the finish and eventually cause the wheel to rust and then fall apart.
Now along the way you can use a coating such as Wheel Guard Max Coat.
Now Wheel Guard Max Coat is a new formulation of synthetic gloss enhancers with protective coating technology.
So the protective coating is going to repel anything from anything sticking onto the wheel.
It's gonna make it a lot easier to clean the wheel
and the gloss enhancers are gonna make the wheel look a lot better along the way.
Now you can use Wheel Guard Max Coat on any type of wheel that's glossy.
So I'm gonna open up the pot of Wheel Guard Max Coat.
See I have this nice green putty.
Now this putty is easy to spread with a microfiber applicator pad.
You can use foam as well. I'm gonna use a Workhorse Grey Microfiber Applicator.
So I'm going to take a little bit of Wheel Guard Max Coat.
I'm gonna spread it out
over the face of the wheel. I'm just going to spread out
the bulk of the product all along the spokes, in the hub, then on the rim of the wheel.
When you have a car that goes from 0-60 in less than 3 seconds.
Then 60 - 0 in like one second.
You got to know that it's stopping very hard, it's gonna be kicking up a lot of brake dust.
Brake dust is very hot and very corrosive. It's made up of cindered metal off of the brake rotors.
And any of the material off of the brake pads.
Theirs all kinds of things in there like carbon or Kevlar, things that you don't want sticking inside the wheel.
So just a thing coat of Wheel Guard Max Coat is all you need.
You see that you don't see the green anymore once you spread an even coat over the wheel. You don't need anymore than that.
I'm going to let this cure for about 10 - 15 minutes.
This gives me enough time to do the rest of the wheels.
And then we'll come back and buff it off to show you the great results.
Ok now we are back it's been about 15 minutes.
We've had enough time for the Wheel Guard coating to dry.
I'm going to take a Grey Workhorse Microfiber Towel.
So when you put on the thin even coat which is all you need, Wheel Guard buffs off very easily.
All I'm left with now is a high gloss shine on these Nissan GT-R wheels.
Look at that! This is looking great!
So now with just one coating of Wheel Guard
the owner is going to have a much easier time when he cleans these wheels every week.
We'll be able to clean them a simple wheel wash soap or any car wash soap like, Honeydew Snow Foam.
If he needs a little extra cut he could use Diablo Wheel Gel and a soft brush.
It will come back to looking like brand new.
So this is what the wheel will look like if the owner takes car of them during a normal wash for the next 6 - 8 months.
All thanks to Wheel Guard, this protective coating is going to enhance the gloss
enhance the look of the wheel, keep it looking great.
So if you want to know more about the Max Coat Wheel Guard you can check it out on our website.
Links are down below.
If you want to learn how to detail any part of your car, inside or out,
subscribe to our YouTube channel.
We have over 800 videos showing you how to do, just about anything.
You have a nice car. Let's keep it clean with Chemical Guys.