Hi, I'm REYNER. incarnated am a professor rainer good find
in the workshop initial maintenance to speak of industrial machines
and
otherwise to enter and what
a year ago vertically not taken
the above let's say
differently live and also a position
here coupling In this relationship we only had this the spindle these two
dice that we had to complement it with the axis in this case so that we can couple this
mechanism we must play in the assembly with this pinion this helical pinion we are going to mount it
here these two dice must be coincide in this slot as well as see Fernando and this must
coincide with this gear of the ico since this power pinion is here then and this one here
is the one that receives the movement, mounting this pinion will allow me to do the transmission
of the movement from horizontal to vertical but it must engage these two this pinion mentioned here with
this wheel of the and cordial now this head has another c This characteristic allows
me to see here that it has a recording in the vertical here that allows moving the
360 degrees achieving different angles, different positions to be machined differently,
as in it we are going to say so in the transfer it is from horizontal to vertical
has an elbow at 45 here this elbow that is here can be discounted and it can also be rotated and placed
at angles let's say defined for a work x and complementing these two
graduations we can achieve working angles let's say wide large
so now we are going to do the assembly and later we are going to do the test and
i
the head brings a small diagram that is where it tells us the fat
points so it is always appropriate it is not indicated to check the number
of working hours and the points for where we can trace in order to
keep the machine and the mechanism lubricated, also this one that remains to know how
you have Now we have put to cut
we did manual tests now we are going to do the test with the machine,
please
remember
how we can observe between the two rivers that maintain it, we can locate it
horizontally,
the day
we have, please, and the indicator where it does not allow it to remain vertical So in
this case it would be where the zero degree is or the reference point is 90, it
was different from 90 all the day
and we already managed here now we cannot turn on
when turning on
and it continued to look on, it would be necessary to see if the position is vertical vertical