Jaystepher here today with a tutorial on the Lego Yellow School Bus.
I will be covering the chassis,
passenger seating,
wall construction,
front end,
and roof.
The first part of this tutorial I'm going to show you how to make the chassis
for your yellow Lego School Bus.
First let's start off with a 1 by 14 Technic brick.
This has 13 holes,
and a three-stud long tie.
It has a flange.
Stick the part with the flange into the fifth hole right here.
Now let's use two friction ties,
place them in to these two holes right here.
Now let's come from the fourth hole from this end right here,
drop in a friction tie.
Skip one hole
and drop in our other friction tie,
followed by
a 1 by 4 Technic brick.
Set it on top of these two friction ties right here.
And finally, let's take a 1 by 16 Technic brick. It has fifteen holes,
And finally, let's take a 1 by 16 Technic brick. This has fifteen holes,
I'm going to lock in our friction ties into these two holes right here.
Next let's take another 1 by 14 Tecknic brick,
and use to friction ties,
I'm going to place them into these two holes right here.
Now take two more friction ties,
I'm going to place a friction tie this end hole right here.
Skip five holes,
and place the other friction tie right here.
Now use a 1 by 8 Technic brick with 7 holes, I'm going to stick it on my friction ties like so.
And something to attach my wheel to,
I'm going to use just a plan old standard tie,
place it in the third hole.
This will give us something to attach our wheel to.
Now let's take the two pieces we've just assembled,
I'm going to take these two friction ties and insert them into these two holes
like so.
Now let's take
a 2 by 4 axle brick,
place it into this center hole right here.
This is going to give us some equal spacing.
Now we're going to take 2 by 2 axle brick,
place it into the sixth hole right here.
Followed by another axle brick, 2 by 2, you
place it into this hole right here.
This will give our chassis equal spacing.
Now let's take a 1 by 14 Technic brick,
and a three-stud long tie.
Take this part here with the flange, stick it into he fifth hole.
Now let's take two friction ties,
I'm going to place two of them here,
in these two holes here at the end.
Now come from the fourth hole from this end here on the left,
drop this friction tie in.
Skip one hole
and stick our other friction tie.
Now let's take a 1 by 4 Technic brick,
we're going to place it on top of our
friction ties.
Follow by, a 1 by 16 brick,
places right here
on top of our other friction ties.
Let's take our last 1 by 14 Technic brick,
take two friction ties,
let's place them into these two holes right here.
Skip two holes,
place another friction tie,
followed by our last friction tie. Let's place it in this very end hole right here.
Now let's take our 1 by 10 Technic brick,
place it right on top of our friction ties.
And just a regular tie, stick it in the third hole.
This gives us something to attach our other wheel to.
Now let's take the two pieces we've just assembled,
I'm going to take the two friction ties, I'm going to insert them into these two holes right here
mike so.
And take the piece we previously made,
line everything up,
put this in the second hole here
and the sixth hole here.
Let's just snap this whole area together, just take your time.
Slowly work its way in there.
There you have it,
there is the rigid frame for our chassis.
Now let's begin the deck of our chassis.
Start off with two 1 by 2 black radiator grilles,
place them right here.
This is going to be our step for the passengers to enter the school bus.
Now let's use a 4 by 6 plate,
stick it right above our radiator grilles like so,
followed by a 2 by 8 plate,
place it right here
where this end here is even with the 4 by 6 plate,
and we have a one stud hangover.
Now let's use two 2 by 6 plates,
I'm going to place one on the top
and one on the bottom,
followed by two 2 by 4 plates,
put this one on the top and one on the bottom.
This is going to lock our axle bricks together. together
Now let's take two more 2 by 4 plates,
place one on the top and bottom,
followed by two 1 by 4 plates.
Place them here and they're end-to-end like so.
Another 2 by 8 plate,
place it along here
where our wheel wells are going to be.
Now let's use two 1 by 8 grey plates,
place one on top of the frame, and one on the other side of the frame.
Now let's use a 2 by 4 plate,
place along our last axle brick.
Two 2 by 6 plates,
place them on the top and bottom of our
Technic brick like so,
and it's even with our 2 by 4 plate.
And finally,
two 2 by 3 plates,
place them on the end of our Technic bricks.
Not to install the floor of our bus.
Let's start off with a 6 by 6 plate,
place t right here on this end
where we have a one-stud reveal all the way around the the edges.
Press it down firmly.
Now use a 4 by 6 plate, place it right above our axles here.
Now take a 6 by 16 plate,
place it over this area here.
Just firmly press it down.
Now a 1 by 4, place it up here,
followed by a 4 by 4 plate to fill this area in.
The next thing I like to do is come in and put a
black line on the bottom
of my deck here.
So I'm going to flip my chassis over.
I'm going to start off right here with a 1 by 3 plate.
place it upside down and stick it right on the bottom.
Next let's use a 1 by 10,
place it right next to our 1 by 3.
Finally a 1 by 8.
Now to work on this side, I'm going to start with a 1 by 8 plate,
a 1 by 6 for the rear,
and finally a 1 by 8
on this side of the bus.
Now to finish up this side,
take two more1 by 8 plates,
place it on this side of the chassis
right next to our wheel well,
and put our last 1 by 8 here.
Leave this 1 by 1 opening here.
This is going to be for our door.
Make sure everything's firmly secured.
Now for the rear my bus I want to attach a bumper here.
I'm going to start off with a 1 by 8 plate,
and I want to place a 1 by 8 smooth tile on the top of my 1 by 8 plate.
like so.
And let's take a 1 by 2 by 1 by 4 angle plate,
we're going to place it right in the middle
of our 1 by 8 plate.
like so.
And simply slip this in this 1 by 2 opening.
And there is the bumper
for the rear of the school bus.
Now to level everything up here with our deck,
I'm going to start off with a 1 by 8 plate,
place it where my bumper's at
here at the rear.
Use two 1 by 6 plates
place one on the top and one on the bottom.
Now I want to crown off my wheel wells
so I'm going to use a 1 by 6
arched brick with a screen,
and I'm going to stick the screen part inside.
Place it right over the axle.
Take another one, put it on the top.
Right next to our wheel wells, I'm going to take
two more 1 by 4 plates, place one on the top
and one on the bottom.
Followed by two 1 by 6 plates.
Take another 1 by 6 plate,
we'll place it right here, right by our door.
And finally,
a 1 by 10 plate on top.
And there is the chassis of the bus.
In the next tutorial,
I'm going to be covering passenger seating.
Thank you for watching!