THIS VIDEO HAS NO AUDIO
[Removing and Replacing the Pickup Drive Assembly]
[HP LaserJet Enterprise MFP M630 Printer]
[Find more videos like this]
[at: hp.com/SupportVideos YouTube@HPPrinterSupport]
Note area indicated in red.
Pull tab to release and open cabinet as shown.
Remove screw indicated in yellow.
Remove panel as shown.
Open panel door as shown.
Remove screws indicated in yellow.
Note area indicated in red.
Using a flat-head screwdriver, gently pry loose as shown.
Remove panel as shown.
Remove screws indicated in yellow.
Remove panel as shown.
Remove screw indicated in yellow.
Note area indicated in red.
Using a flat-head screwdriver, gently pry loose as shown.
Remove panel as shown.
Remove screws indicated in yellow.
Loosen panel as shown.
Disconnect cable indicated in yellow.
Remove panel as shown.
Tape tray as shown.
Note areas indicated in red.
Remove joints from hinges as shown.
Lift tray as shown.
Lift panel as shown.
Note area indicated in red.
Using needle-nose pliers, gently loosen spring as shown.
Note area indicated in red.
Using needle-nose pliers, gently loosen spring as shown.
Remove panel door as shown.
Open panel door as shown.
Note area indicated in red.
Using a flat-head screwdriver, detach tab from hinge as shown.
Note area indicated in red.
Using needle-nose pliers, remove hinge as shown.
Remove panel door and hinge as shown.
Disconnect cables indicated in yellow.
Remove screws indicated in yellow.
Note area indicated in red.
Remove part as shown.
Disconnect cable indicated in yellow.
Remove screws indicated in yellow.
Remove part as shown.
Remove cabinet as shown.
Remove screws indicated in yellow.
Remove panel as shown.
[Find more videos like this]
[at: hp.com/SupportVideos YouTube@HPPrinterSupport]
[HP]