NoAPP Setup The LED indicator should flash intermittently.
NoAPP is very simple to be handled, with only 3 steps you can finish the setup.
First, just power on the device, find and connect to the device network name in your
phone's Wi-Fi settings Second, a landing page pops up, specify your
home Wi-Fi network, input an email as your account and give a name to the device.
Last, the LED indicator will be stabilized, and you will receive a confirmation email
when the device is online, you can start to enable the skill in Google Home and Alexa.
Open Alexa, search and enable the skill. Choose NoAPP option and input the same email
as you used in landing page. You will get a verification code by email
and just input the code to complete account linking.
The device will be discovered and now you can control it.
For Google, it's almost same. If you already installed BroadLink app in
your phone, the process will be much easier! The BroadLink app will be automatically pulled
up, then you just tap agree to link the skill.
We also shared some other videos. Welcome to subscribe to our channel BroadLink International
to learn more.
AP SETUP (with BroadLink App)
The status of LED indicator should flash intermittently. Download BroadLink APP in APP store, for the
first-time use, you need to confirm the privacy terms.
Tap "Yes" to proceed AP Setup. You can open the settings of your phone to
confirm if you have connected to the right SSID.
If the landing page pop up, please tap "Use Without Internet" and close the page.
Then, back to the APP and connect to the Wi-Fi in your home.
Please notice, we only support 2.4GHz Wi-Fi. Now you can name your device.
Android For Android users, when the device is in AP
setup mode, tap "Add device", the phone will begin to scan the hotspot of device automatically.
This is different from iOS users. Then you can choose the Wi-Fi in your home
and enter the password.
Smart Setup (with BroadLink App) The status of LED indicator should flash quickly
Same as AP Setup, we need to tap "Add Device" first.
Here you need to choose "No" to enter the Smart Setup.
The next steps are very similar to AP Setup. Enter the name and the password and connect
to the Wi-Fi in your home. Then you can name your device
For Android users, when the device is in Smart setup mode, just tap "Add device",
choose the Wi-Fi in your home, and connect to your Wi-Fi.
This is also different from iOS users.
If you like these videos, don't forget to like, comment and share the videos.
Your support is our passion!