Bulb replacement for l g zenith six nine one two b two two zero zero seven a lamp brought to
you by shopjimmy.com Visit www.shopjimmy.com to search the hundreds
of thousands of TV parts in our inventory To properly replace the bulb inside of your
projection TV lamp you'll need the following materials a pair of latex gloves your shopjimmy.com
replacement bulb a pair of needle nose pliers a cup to hold your lamps screws clips and
other small items both a flathead and phillips screwdriver and a piece of tape to use as
a marker or guide so lets get to it shall we
unscrew and remove the lamp door at the back of your tv
remove all lamp screws
gently guide the lamp out of the back of the tv keeping a firm grip on the handle
remove all other housing screws with a screwdriver for this lamp there are four housing screws
located on two sides of the housing
pull the two pieces of housing apart release the lamp plug from the housing by
removing the two screws that surround the plug
release the bulb from the housing by removing the screws and metal bulb clips
make sure to note the locations of clips orientation of the bulb within the housing and orientation
of the wires
remove the bulb from the housing before removing the wire harness from the
bulb mark one wire with a piece of tape or sticker and make a note so that you don't
forget if you've marked the rear or side terminal connection of the wire harness
release the rear bulb terminal by removing the nut and washer with a needlenose pliers
release the side bulb terminal by removing the screw with a phillips screwdriver
prior to installing your new bulb check both bulbs and verify that they are equal
reinstall the wire harness refer back to your notes to confirm that you
have matched the terminal connections correctly and to make sure that you have the wires pointing
in the correct direction place the new bulb into the front housing
piece referring to your notes to ensure you the correct orientation
reinstall the bulb clips and screws referring to your notes to verify that you are placing
the clips in the correct locations slide the plug back into place and hold it
in place with the corresponding screws reattach the housing
reinsert all housing screws well look at that
you did it your lamp is now ready to be reinstalled into
your tv gently guide the lamp back into the tv keeping
a firm grip on the handle tighten all screws until they are handtight
reinstall the lamp door and tighten the door screws
plug in the tv and turn the power on and your shopjimmy replacement bulb will light up immediately
Thank you for watching one of our many tutorials here at shopjimmy.com
if you need any further assistance please don't hesitate to call our award winning customer
service team at the number on your screen to help with the inquiry please write down
the shop jimmy item number also provided on your screen