Congratulations on your brand new Brio 3 S19 Deluxe!
It will be packaged securely
Simply open the box
Remove the charging box, and check around to see which side the wheels are on
Lay the box flat so that the wheels are facing the ground
Carefully pull out the scooter
Remove all the packaging from your scooter
Your scooter will already have had its electrical connections, brakes
and tyre inflations checked by our professionals
You will need to unfold it
Have the scooter resting on the ground on the rear wheels
Push the red lever on the side of the scooter with your foot and pull the tiller up
Keep pulling until you hear a click and the front wheels will touch the ground
Unfold the backrest and raise the armrests
In the box, you will have received a charger
To charge your scooter, connect the cable to the battery box
Slide the charger port open and plug in the XLR charger
We recommend purchasing an Outlet Surge Protector for your scooter
This will help protect your scooter from damage in the event of a sudden power surge
Plug the charger into the standard wall outlet
If the battery indicator shows red, you will need to leave it to charge
Batteries are usually fully charged in 4-10 hours
It is recommended you charge your scooter overnight after daily use
If the battery indicator shows green, your scooter is fully charged
Don't let your scooter charge drop to 0
Once your scooter is charged, it will not overcharge if left connected
The amperage from the charger will almost be 0
Your scooter will be fine to be left to charge overnight
Your scooter has a simple display panel, including your battery indicator
speed dial, power light, key, horn and headlights
It is important to keep an eye on your battery indicator, as it is a visual representation of your charge
If you're on green, your battery is well charged
On yellow, start considering charging it
On red, you have low charge and will need to recharge your scooter
Your power light is used for troubleshooting your scooter
The number of times it flashes will give you an idea as to what the problem may be
For more information, please refer to the manual
To turn your headlights on, flick the button to 'ON'
To turn them off, flick the button to 'OFF'
To activate 'Free-Wheel' mode on your scooter, locate the red lever above the back right wheel arch
Push the lever up to activate 'Free-Wheel' mode
This means you will be able to push your scooter manually
To take it off, simply push the lever down again
Make sure your scooter is off when you activate 'Free-Wheel' mode
Don't 'Free-Wheel' the scooter on a slope
If you activate 'Free-Wheel' mode when your scooter is on, you will need to switch your scooter off and restart it
This will re-engage the brakes
To fold you scooter, fold the chair and armrests down
Push the red lever with your foot and pull the tiller down towards the scooter
If you have any questions with your new Brio, be sure to refer to the manual
Or contact Out and About Healthcare