These are the sinkers generally used for eging fishing.
We'll show you how to make good tip in a way to reduce bottom snags.
We will show you a rig that allows you to adjust the depth of the egi using beads.
For the beads that are placed in the middle to make the movement of the more smooth,
We recommend luminous beads rather than general beads for night fishing.
By moving up and down, the depth of the egi can be adjusted.
This is the completed rig for the egi. Also it can be used as paternoster rig for land based fishing.
This is how it looks like it is settled in the water of the Egi. Depending on the weight of the sinker and the type of the egi, make 35 - 75 angle.
This is what it looks like when you attach the egi on this rig.
In order to keep the egi in its original state, We do not cut the canna or lead sinker to match the horizontal level.
We are going to wrap the wire near to the canna. Or you can wind the lead solder wire.
If you can't match the horizontal level with one, add one or two more.
After the test, use enough glue to keep the wire from falling off.
It is a horizontal state with one more added in the water.