Hi everyone, welcome to HowFixit.
In this video guide, I'll show you how to replace bottom cover and vision sensors module
on the DJI Mavic 3 drone.
To disassemble DJI Mavic drone you'll need the following tools:
Screwdriver set with Phillips 1 and Torx T5 screwdriver
Plastic pry tools Tweezers
In the description, I left links where to buy all the necessary tools.
Before you start, remove the battery.
Disconnect the cable and remove the vision sensors.
In the description, I left a link where to buy a vision sensors module for your drone
DJI Mavic 3.
The drone is assembled, and now you can check it.
I really appreciate you watching my video guides, you can ask all additional questions
regarding the repair in the comments.
Thanks for watching and have a safe flight.