[Music]
this video shows how to work with the
sage studio in online mode using a mic
on p1 for 3 connection is made the front
port using rs-232 cable and serial to
USB convert we don't create the instance
each time the cable is connected the
comport number can be checked with
device manager it may change in next
connection in order to connect to the
relay we must activate a system or
create a new it's possible to choose
directly Quick Connect from start page
choose correct platform and in this case
front port the correct comport must be
selected in this case we don't need to
set the speed if connection is
established relay will answer with its
identification and create a new device
into the project each device has a
connection definition this will be
automatically configured when using
quick connect notice that within one
system relay name must be unique and if
the relay ID is identified with the
serial number it can be inserted twice
to the system
if we check the connection it is fixed
to come 14 if this change with the USB
adapter the connection must be edited
the settings can be extracted from the
ID
passcode is by default four times
capital a
a new setting file is created name start
from zero zero zero
double-clicking on the file it will open
the setting menus as example let's
change plant reference setting by
right-click and select edit value'
setting is red color until saved to the
file we also need to send change to
relay choosing from upper level all
parameter is sent or also only the
single parameter can be sent
password is by default four times
capital a
let's edit the parameter again but this
time we don't send a change to relay
if you now read the parameter again it
changed the actual value from the ID
only save the file will change the red
color to black
it is also possible to send a whole
setting file to relay then right-click
on the name and choose send
they have to choose which file we want
to send
if there is no error messages all
setting will be updated
you
[Applause]
you