Hey, DIYers, George here from Alarm Grid.
Today we're going to be showing you
how to bypass zones using a Honeywell Tuxedo Touch WIFI.
So I'm going to be using this Honeywell Tuxedo
Touch right here.
And the first thing I just want to go over again
is that a Honeywell Tuxedo Touch keypad is actually
just a keypad, it's not an alarm system.
A lot of people, whenever they're looking for a new alarm
system, they'll see the Honeywell Tuxedo Touch WIFI
and they'll say, oh, can I just get that and add it
to my already existing system?
A Honeywell Tuxedo Touch keypad is basically
a keypad that's touch screen with Z-Wave capability built-in
that you can add onto a VISTA, such as the VISTA-20P,
15P 21IP, even a 128BPT.
Yes, so if you guys are interested in getting
a Honeywell Tuxedo Touch keypad and want
to see if it's compatible, make sure you contact us.
Now as far as bypassing zones, what
does it mean to bypass a zone?
When you bypasses a zone, you're telling the security system
to ignore that zone, no matter if it's
in a disarmed or armed state.
So if there is a zone that you want the system to completely
ignore, because you don't want to have that zone setting
the system off or making the system
chime, either voice or just a normal chime,
then you will be bypassing the zone.
And you can actually do that through the Honeywell Tuxedo
Touch screen.
And right now I'm going to go ahead and show you that.
So the very first thing you'll see at the top of this keypad
is that it actually says, Not Ready, Fault A fault is just
simply letting you know that there's a zone, a sensor,
that's currently open.
It might be a door, window, motion sensor,
your garage door.
If there is a fault, you can actually go to the screen where
you see the faults-- we have a video to show you how to do
that as well--
and from that same screen you can bypass
that sensor or that device.
So we're going to go ahead and hit Security.
Once you hit Security there is going
to be a button off here to the right-hand side that
says Faulted Zones, very self-explanatory.
You're going to go ahead and hit Faulted Zones
and it should bring up any zones that are currently faulted.
Right now I have a simple zone 1 and zone 2 that
are currently showing open.
You guys might have a whole list of them,
so you guys can actually go in and select and bypass
whichever ones you guys want.
For the sake of the video, I'm going
to show you guys a couple of different things you can do.
If you want to select certain zones that you want to bypass,
you can just click on them.
It will highlight it a blue color.
And then you can just hit Bypass Selected.
If you don't want to go in and select one by one
and you want to just bypass all of the zones,
you can just hit Bypass All.
Now, when you hit Bypass All, or if you're
bypassing the selected zones, you
are going to need to enter in a code.
This can be a master code or any other subuser code
that's on the system, right?
So I'm going to use my default master code, which is 1234.
Obviously, yours may be different,
because you guys should have changed it.
So I'm going to enter in 1 2 3 4.
Code entered.
And then you'll notice that at the very top, since I just
bypassed all of the zones that were faulted,
my system is now ready.
But it's also letting me know it's ready,
but there's a bypass, meaning that there are some devices
that have been bypassed.
All right, so that's how you bypass faulted zones.
But now, let's say what if there is a window that's not faulted,
meaning it's in a ready state, and you guys
want to bypass that, because let's say
you like to open the window at night when
you're going to bed to let some fresh air in.
To do that, we actually have to go
to Show Zones, that will show you every single zone.
So it's actually going to show you
any zone that it's in a ready state or any zone that's
in a faulted state.
So to do that, let's say we're at the home screen
on the Tuxedo Touch WIFI.
We're going to go ahead and hit Security.
From security we're going to go to More Choices, which
is on the same screen where you saw faulted zones earlier.
So once you hit More Choices there
you're going to go to Show Zones.
Now, this screen here will pull up
every single zone, whether it's faulted or in a ready state.
Now, here we actually did a little programming
to the system and zone 1 is a ready state
and we have zone 2 faulted, which
is why it has that little x mark on it.
And we seem to have a zone 9, and zone 99 is a panic.
You don't really need to bypass that.
But anyways, let's say we want to bypass
the faulted zone and a zone that's already
in a good state, which if you take too long
it'll back you out.
So let's go ahead and go to Security once more, More
Choices, Show Zones.
It'll pull in all of the zones.
And let's select zone 1, zone 2 and let's select zone 9,
just for the sake of the video.
Now, after you do that, you're going
to hit Bypass Selected, which is the same button
you saw on the faulted zone screen.
So we're going to go to Bypass Selected, and same thing,
it's going to ask you for a code.
Now, that could be your master code
or it could be any of the other subuser codes.
So mine, again, is defaulted at 1234.
Yours should be different.
1 2 3 4, code entered.
And then in a moment here you should
see Ready Bypass in a second, once
it backs me out to the screen.
Yep, Ready Bypass.
So now I have all of my zones bypassed,
you can arm the system and bypass the faulted zones.
And then whatever zone that was in a ready state,
let's say it's your window that you want to open up at night,
that is also bypassed, so when you open it up,
the alarm won't go off.
So let's say those zones that I bypassed were windows or doors.
If I arm the system, those windows or doors
are not going to be protected, because the system is ignoring
any signals that are coming from those areas
or from that specific sensor, that sensor that's
associated to the zone.
So now what happens if I made a mistake
and I bypassed a zone that I didn't mean to bypass?
You can actually go back into the Security,
go into the Faulted Zones area.
And from this same screen, you can go ahead
and clear the bypasses.
You're going to need, again, a user code, the master
or subuser code.
I'm going to use 1 2 3 4, code entered.
And now, since I cleared the bypass,
the zones are going to show faulted again
on the system, which is why you now see it's not ready and is
showing me faults.
You can go back into the faulted zones.
And you'll see that these are the faulted.
And again, you can go back in and bypass
whatever you need to bypass.
Again, make sure when you guys are bypassing,
you're checking every sensor.
You don't want to bypass things such as your front door.
I would say that's one of the main protected areas
that you want to have covered, right, your front door.
So just be careful when you're bypassing stuff,
because remember, the system will
be ignoring any faults coming from that zone.
So again, this is just a quick video
showing you guys how to bypass zones on a Honeywell Tuxedo
Touch.
If you found the video helpful, make
sure you hit Like underneath, subscribe to the YouTube
channel, and hit that little bell icon
to enable notification, so when we upload new content,
you all get notified.
Again, my name is George.
I'll see you guys next time.