move forward through time and circumstances I am supported by
the warmth of the family and at home alta-profile create warmth and comfort of your home
friends to everyone a huge hello today we will work with such tees at the corners we will see that they can be
connected not only to the HDPE pipe so everyone have a pleasant viewing, of course, first of
all these corners are provided for HDPE pipes and but here a small jamb is assembled
of course everything is elementary just here but you don’t need to have five higher formations
assembled, twisted but the biggest defect and the biggest problem is its bend, well, for example,
as we see it is not even, but you can of course it can be warmed up under straightening,
but it still won’t be perfectly even, that is, there will be some bends, and you and I need
to make a perfectly even angle of 90 degrees, well, there are all sorts of situations for this, we remove,
throw out the pipe, take a polypropylene pipe with you in my case, it is 25 of the same diameter
with a smooth cut edge, but the edge is necessary as on the pnd pipe there are special strippings for this,
but
of course you can do it with a knife, because we still do it at home and
not everyone has a specialized tool
; right on the very edge to process that it looked something like this,
our pipe fits perfectly
, as you can see, yes
, like this, and from the second edge we do the same, I even show it on a large piece,
and on the pnd pipe on such a piece there was generally a very large bend
and now we you see our pipe is connected and has a clearly even line
, by the way, I use it myself in the plumbing in the plumbing system, it holds 4 bars perfectly.
Similarly, you can continue and assemble our system further
. here we have a whole knot assembled, that is, here it will clearly be 90 degrees,
in my basement I assembled the same system on a polypropylene pipe 32, as you can see here, here it
was impossible to straighten the curve 32, but I need I had to make straight sections in order to
connect, I had to get out of the situation in this way I
cut off the same segments and now behind the scenes I’ll assemble it I’ll show you how it will look with a PND pipe here are friends like this
it looks like also 90 degrees our tube angle is assembled as I said the same
length a little it can even be longer, that is, 90 degrees, as you can see, no, and it won’t be, yes, it
can be seated with whatever screeds stretch there, but it still won’t be even, but with a polypropylene
pipe it will be cool, use
friends, I also saw an interesting way to connect HDPE pipes by soldering, but I immediately say this, not for an apartment, not for a house, purely for a country option
, in general, it’s already cooled down so warm, let’s try to break how it behaves,
and it’s broken off, you see how the plastic itself, that is, the soldering remained in place,
yes, for the summer water supply of a street water supply, it may be suitable, but not for the inside, just
as an idea, as an option, maybe
friends, you and I turned out to be such a short little Of course, I don’t teach anyone anything, I just showed how using I that showing others I tried to show you my
personal experience I hope it was useful to anyone, who liked it, if you liked it, be sure to thumbs up
write your opinion also don’t forget to subscribe to the channel it’s very important for me
, I wish you all good good health all the best and see you again bye bye