hey everyone drew with geoarm and i am back to talk to you about the 2gig gc2e
and the programming of the pad 1-345 into the panel super easy to do we're going to go ahead and
hit security to start off and then menu and then toolbox go ahead and enter whatever your installer
code is mine is the factory code of one five six one then we're going to hit the right arrow twice
at this moment go ahead and choose install our toolbox and then system configuration
now go ahead and hit the skip button until you get to q4
so it starts off at q1 hit skip skip skip and then you should be at q4 and you should see
select rf keypad number one to four i am not going to program on any other than one right now
because i don't have any other keypads programmed in if you do you would just press the right or
left arrows to choose which keypad you want to program as i said i'm going to leave it on one
go ahead and hit the down arrow to confirm that it wants to know if this device is going to be
used so you press the right arrow to enable that and then go ahead and hit the down arrow
now it wants to know the equipment code for this device the equipment code
is zero eight six seven for the pad one once again that is zero eight six seven
once you've entered that correctly hit the down arrow to acknowledge it then you wanna go ahead
and hit shift and then learn so that we can learn the keypad in you can press any button
you'd like on this thing it'll learn it in i'm just going to go ahead and hit the number one
then hit ok to confirm it confirm that that serial number is correct and then hit the down
arrow it wants to know the equipment age it is a new piece of equipment so we'll hit the down arrow
now it wants to know if the emergency keys are going to be used or not i do want to
use the fire and police keys so i'm going to leave that in there hit the down arrow
it then wants the voice descriptor for the keypad this is keypad 1 so we'll go ahead
and we'll hit the down arrow to confirm that now this point the keypad is programmed in so
we're going to go ahead and we're going to hit the skip key and then we're going to hit end
that will program it in and at this point it will show a whole listing of things that are there
you can uncheck the box that says uh save changes if you've made a mistake
uh i didn't so i'm gonna leave it checked and i'm gonna hit exit
it should go through a reboot procedure at this point we're gonna wait for the keypad to come back
up once the keypad comes back up we'll go ahead and we'll use this new device and see if it works
all right let's see what we have here
okay so we'll go ahead and we'll hit stay
okay and now we'll go ahead and we'll disarm it with the code that's programmed in the panel
my code is still the factory code of one one one one so that should disarm it here
okay sometimes there's a little bit of a lag you have to press it a few more times but
uh one one one one did disarm it now we'll go ahead and we'll arm it away mode
okay now we'll go ahead and we'll disarm it
okay now it's disarmed i would test the police in fire panics but it'll get a little loud so no need
to do that this keypad is programmed correctly at this moment it is ready for use you can go and get
it mounted uh if you guys have any questions or any comments at all please leave them below
but other than that take care and have a great day make sure to subscribe to our youtube page
and click the show more tab underneath the video where you can view valuable links pertaining
to this product similar how-to videos and our low-cost no contract alarm monitoring services