(high energy electric guitar music)
(bouncy techno music)
- So I've got a little set up here to show you guys
how nitrous is delivered but here's
why it makes horse power.
So ambient air, what we're all breathing in,
has about 20% oxygen in it and nitrous oxide, N2O
has like 33% oxygen in it.
So basically what it does when it sprays in your engine
it creates an oxygen rich environment so you can burn
more fuel and make more horse power.
Right? That's our favorite.
Here's how it comes in.
(loud spraying)
So it comes out of that sprayer plate and it's
pretty well atomized.
Its like 800 PSI, no big deal.
(loud spraying)
So I've got our nitrous bottle bolted into the back
of the Cadillac, it's nice and secure cause
this is obviously pretty flammable stuff inside
- Let me check
Yeah that's good
- That's good, you feel good about it?
- I feel good about that.
- One thing you want to know and when you're mounting
these things, there is a siphon tube inside these bottles.
It runs right down here and picks up nitrous at
the very bottom you want to make sure that this thing
is installed with the outlet pointed down,
where the whole bottle fully up.
- Now the orientation should be facing this way
cause you'll accelerate, you want all that down there.
- Exactly, its actually liquid inside the bottle
so pointed down towards the bottom its gunna keep as
much nitrous flowing to the engine as possible.
(rhythmic rock music)
- We are about to mount the ride height sensors as we've
got that kit that tells it exactly what each corner
is doing. They're like little TPS's.
The tensi-omiters, that's what the sell is yeah.
That's how these switches work.
- So it sends information via ohms resistance
to the processor. Which will then in turn synchronize
all four corners and front to rear. Everything.
And then there is a pressure sensor you pile a bunch
of people into the car, it sees there's more pressure,
it levels. Its pretty cool.
- Bring it back up, high tech stuff.
So I've got the uh, suspension ride height sensor.
Zipped into the frame here. And then got a small rod
I'm gunna use to connect this with a stand off
to the lower arm.
So that as this suspension moves up and down
the sensor will read the exact ride height.
Pretty straight forward.
(rhythmic rock music)
(power tool noise)
- So its not like we haven't cut enough up on this car,
we had to relocate the front shocks, cause we
have an airbag where the spring used to be.
And the shock used to travel though the center
of the spring.
So now we relocated the shocks to in front of the airbag
or where the spring used to be and we have
to fabricate lower control arm mounts,
upper control arm mounts. Cause a small spot through
the frame for the shock to travel through
and put a pedestal up top.
- [Tony Angelo] A shock tower up top.
- So uh yeah, bolt in job, no cutting necessary.
(rhythmic rock music)
- Okay so after a couple of days hard work we've
got the BCFAB FPSS air suspension fully in there.
Got the nitrous kit, we've got our
hooker electronic exhaust.
The LS 53, and the last thing we need to do to this
thing is make it look a little bit better, right?
- Yeah
- Can't roll around in these old crusty
dry rotted tires anymore. So I went out
and grabbed some cool stuff.
- Wait, you get these after the road trip?
- Yeah.
- Nice.
- Yeah I don't want to ruin them.
- Yeah.
- I don't want to ruin them on the road.
These are 17 by 8 US wheel,
Deuces or type 455 and 17 by 8 with 235 55 17
BF Goodrich tires on here
and its gunna make this thing awesome.
I didn't want to spend a million bucks, we never do on
this show. So I didn't get a crazy alloy wheel,
these are just nice steel wheels that come in a ton
of different sizes. We got trim rings and you know
moon style center caps. Slap these things on, car
goes on the ground, and then we're gunna hit the road.
Oh, they're heavy! Oh my God.
- Yeah they're not light.
(power tool drilling)
These wheels are kind of nicer than the car.
- [Lucky Costa] Don't say that this car is beautiful.
We got these wheels, just raw metal and just did a paint
with a spray can. You know a little enamel
appliance style epoxy. And they look awesome.
White so we'll probably ruin them immediately.
But for the next two weeks, gunna look bitchin'.
Okay so you've got the wheels and tires on,
we go to drop this thing down, torque em' on.
Got to wire the nitrous switch. We've got a few extra things
to do, and then we're gunna take this thing out
and hit the streets.
Next time you see us, we will be outside
with this thing fully laid out.
- With the police behind us.
- Yeah, cool, running for our lives.
- Let's go.
(high energy electric guitar music)