Hello everyone Welcome back to geardo,
Today we will show you how to replace the camera lens on Huawei P30 lite Mobile phone.
To start, we need to have the right tools to proceed with the repair,
which You can find in the description.
First, turn off the phone, take out the Sim tray, and then follow with the back cover removal.
Here, we are using a heating pad to remove the back cover,
Place the back cover side on the heating pad and Select the mobile phone HEATING option and leave
it till it completes. Alternatively, you can use a heat gun or hairdryer.
Once you feel the heating is enough, use a suction cup to lift the back cover.
In between, Insert a Plastic Card pry tool and gently cut the adhesive.
While taking out the back cover, Be gentle; the fingerprint plug is attached to the back cover.
Next, to remove the brackets and the shield, Undo 10 screws on the board.
Next, take out the board's main bracket, left bracket, and fingerprint connector shield.
Next, unplug the battery and fingerprint connectors.
Next, take out the back cover and for removing the camera lens:
Apply little heat to soften the glue on the camera lens area.
Once you feel the heating is enough,
take out the lens from the back cover by pushing from the rear side.
Next, clean the surface and place the new camera lens glass by adding adhesive.
Next, Secure the fingerprint and battery connectors to the logic board.
Next, place the fingerprint shield and two brackets on the frame by securing ten screws.
Before installing the main back cover, make sure it has enough glue on it;
if not, use B7000 glue or a new double-sided back cover adhesive.
Finally, we are adding bonding clips to fasten the back cover. Leave it for some time and remove it;
if not, use some rubber bands to tighten the back cover.
I hope you have enjoyed the battery replacement guide.
Let us know if you have any questions. Please, like, share, and comment on our videos.
DO not forget to hit the subscribe button.