This is a SpeedForm GT/CS Style Rear Spoiler that comes pre-painted for you and it fits
2015 and newer Mustangs.
This is something that you should check out if you're looking for a pre-painted spoiler
that offers a different type of look than the typical spoiler does.
Most aftermarket spoilers connect to the trunk lid all the way around.
But this is a pedestal type so it lifts off the trunk lid and you have some air space
here, making this look more like a rear wing, just like what you'd see on a California Special
car.
And there aren't many spoiler options out there right now that'll come pre-painted for
you.
This is also gonna be for someone that doesn't mind drilling for the install since this will
require a little bit of that.
But speaking of the install, this is gonna be a two out of three wrenches in the difficulty
meter because of that drilling, and you can expect to spend two hours getting this installed.
The spoiler will be prepped and painted here at American Muscle prior to shipping out to
you.
And we use the same base and clear coat that Ford uses, which means that this will match
your car's paint perfectly.
When you place your order, you just need to have your paint code ready.
And if you aren't sure of the code or the name of the paint, you can always find it
on the inside of the driver's door.
One thing that I did wanna mention here is that this not only is one the few currently
available pre-painted spoilers but it's not even on the expensive side either.
Normally, you can expect pre-painted parts to cost more because of the labor and the
paint that goes into them, but this spoiler still has an average price point.
So this is a California Special style spoiler and, looks-wise, it's gonna replicate that
pretty well.
Like I mentioned earlier, this does sit off and off of the trunk lid, but it doesn't sit
high, and from the right angle, you can hardly tell.
That means that it's not going to block your view in your rear view mirror and it's more
subtle, different look than an in-your-face tall wing would be.
It's made from a blow-molded ABS material.
So it's made from a piece of ABS that's blow-molded, and ABS is known to be very lightweight and
durable.
It's also easily painted, which is always a plus when you're getting a pre-painted part.
And of course, durability is always a nice thing for an exterior part.
When it comes to fitment, this is gonna fit all 2015 and newer Mustangs, so the V6, the
EcoBoost, the GT, and even the GT350 if you wanted it to.
You get everything you need for the install, so your spoiler, drilling templates, and your
hardware.
Even if you already have the factory spoiler, you're looking at needing to drill for the
install here.
No matter what model you have, you need to drill.
The template will help you find the proper location for your drilling holes.
If you have a factory spoiler, just know that the holes from that spoiler will be exposed
once you install this.
So you're looking at needing to take care of those.
You can expect to pay a little over the $400 mark for this spoiler, for a pre-painted part,
and this isn't a bad price at all.
Most spoilers for the S550 cost between $300 and $400 unless you're looking at a carbon
fiber option.
In that case, the carbon fiber does cost more.
But generally speaking, $25 more for a pre-painted part is a really good deal in my opinion.
When it comes to the install, like I mentioned earlier, this isn't necessarily a hard one,
but you are looking at needing to drill.
This is gonna be a two out of three wrenches in the difficulty meter because of that drilling.
You can plan on spending two hours on the install.
The spoiler does install with both hardware and 3M tapes so you're gonna want the paint
as clean as possible.
There are some alcohol prep pads to help you clean the paint and infusion promoter as well
to help create a good bond between the 3M tape and the paint.
That, paired with the bolts and washers, will help the spoilers stay in place.
If you have a stock spoiler on your car, you need to remove it and remove the adhesive
that will be remaining on the car.
You need to pull the deck wing trim panel to do this.
The drilling template will have a centered piece of contact.
You wanna center all four drilling templates over each of the four spoiler mounting points.
You'll then test for the spoiler and center it on the deck lid.
Tape the template to the deck lid and remove the spoiler.
Use the template to drill the center of the template holes and then clean the deck lid
with the supplied alcohol prep pads.
Apply adhesion promoter and then you're ready to remove the backing on the 3M tape and press
the spoiler into place.
After that, you're just looking at getting hardware into place and reinstalling the deck
wing trim panel.
That's gonna wrap things up for the pre-painted GT/CS Style Rear Spoiler for the 2015 and
newer Mustang.
As always, you can check it out more online right here at americanmuscle.com.