The set menu, let's go through this.
You're going to go ahead and touch the ruby menu and go into the one that has the tools
picture.
The set menu will have a variety of different tool bar options.
Let's go to the first one.
Stitch settings, now this will be a little bit more complex, where we can balance the
stitch.
Right now we have a straight stitch selected, so it's not as obvious.
Let's do a honeycomb stitch is what I'm looking for.
There we go, 27.
Then, when we go to the set menu and take a look what we can actually do is balance
this stitch.
Have you ever had it where the stitches, when you do forward and reverse don't always come
together.
This is where you're going to change them.
You can change them front to back or side to side.
You can also change the pressure manually at the stitch settings screen and be able
to get it to be just right.
Remember, any time your numbers turn red, that has been changed for that stitch.
Let's go to sewing settings.
First one, twin needle, if you were to add a twin needle to this machine, come to the
sewing settings area and tell the machine what size of twin needle you're using.
Let's go out of this and you're going to notice that your stitches will all be double.
Look how cool that is ... All be doubled based on that twin needle, so you can actually see
what you're going to get before you actually sew.
This is one of my favorites is a gathering stitch done with a twin needle, because it
looks like, it's just fun.
It's a whole other decorative stitch.
When you're done, when you turn off the machine and turn it back on, it will actually come
up with a little message, "By the way, you have the twin needle setting still selected."
To turn it off, you must manually come in, touch twin needle and come down to the bottom
and check the off button.
Stitch with safety is when you put a straight stitch throat plate on, it will narrow all
your stitches.
A straight stitch's great for when you're doing piecing.
It's good to your fabric.
It's a nice, accurate stitch.
You can also use it with embroidery, because your needle's also going in that center needle
position.
You get a wonderful option.
Just keep in mind if that goes on and you go to a stitch that goes side to side, you
will not get that side to side.
It will come up with a message that you have that safety on in the set menu and remind
you to go turn that off, should you not be needing that anymore.
So, leave that off.
Selected thread cutter auto, that allows it to automatically cut the thread when it's
pre-programmed, like at the end of a button hole.
This machine is set to cut after locking it, it will cut, lift the foot up, so leave that
on unless you absolutely don't want it on at a certain time, but let the machine do
all the work for you.
Automatic jump stitch trim, this will be for embroidery world trim in between as it jumps
from one area to the next.
Beautiful.
Sensor presser foot lift, that's the automatic lift that Husqvarna Viking is known for and
that's awesome.
Fix auto, that means every time you use the header that stitch will come on, so that's
wonderful.
Feed teeth options.
You can actually go in and say I want them up or down or if you leave it at auto, it
will automatically change that as you go from stitches that need it down and back to when
it needs it back up, so that's great.
The next one is actually machine settings.
Leave the language at English, if that is your language.
You can put your name in here, owner's name and you can put in your name, that's always
nice.
The timer is one you can reset.
So, this is not global timer, because you can set it of a project that will allow you
to gauge how long it took you to sew it.
Then, when you're done you can push timer again and it'll reset back to zero.
Hoop selection, this would be where you can actually tell the machine which embroidery
hoops you own, so the gigantic list of hoops don't keep coming up.
It will only come up with the hoops that you have at your fingertips.
Smart save auto, here's something that I know that when you get the machine, this is not
on.
You need to come in here and check it on.
That way, when you are stopping in the middle of an embroidery pattern, this will save it
automatically, right where you left off.
Or, if you had a power outage, bingo, saves it right where it last stitched.
Go ahead and get that turned on immediately when you get your new machine.
Thread manufacturer, this would be how you want your threads to come up in the embroidery,
Robinson Anton or Silky are your options.
Tension portioning and compensation where you can go in and adjust these should you
want to do it more on a global basis, so you don't have to do it from stitch to stitch.
Sensor queue for embroidery, that is going to be on.
That is the foot that we recommend.
That's the white one that comes with it and the deluxe stitch system also on here.
All right, the beeps.
If you like it to beep along with you, you can set this or change it.
So, if you want it to click or not, chirp, or zip, or you don't want the clicks, you
can turn that off.
You can set that for the way you like it to be.
Certain things will come up with multiple beeps for different things.
There's a flute, honk, those are kind of cool.
I usually just leave it at the 3 beeps, that's the default setting, but that's when a little
message comes up like when you run out of bobbin.
Embroidery finished you've got a different sound that you can set up.
That's the best sound ever, because that means my embroidery is done.
Audio repeat.
I'm actually not sure what that one is, I'll have to double check.
Volume, if you want to turn it down you don't want it so loud, so you have that choice.
The last one is screen settings.
For any time that you have it where when you touch an area that it doesn't actually activate,
what you want to do is adjust the touch screen.
What we're going to do, since I touched it, you have to go through the calibration and
you have to be very careful.
Don't touch the screen, but make sure that you use a stylus and you get right in the
center of each of these little pluses.
I'm holding my hand nice and steady.
That will make sure that your screens will get re-adjusted and makes a difference.
Lock screen, so you can set that on and also the screen saver, you can have that be on
or off.
You'll notice if you don't use it your screen goes a little bit and has that pretty texture
that comes up.
You can go ahead and see what that is.
I'm going to quick look up that last one I did not know and I'll come back and tell you
what that is.
It's nice they put extra things in here, that audio repeat is a signal that will come up
and if the message is there it will repeat that pop up message until you actually cancel
it out.
You want to have that keep coming up, you can engage it.
I haven't had that on, so that's why I haven't actually seen it.
So, not a big deal, but if you'd like to have it, go ahead and check the box.