Engineering efficiency with TVDA (Tested Validated Documented Architecture)
Every TVDA includes a SoMachine project template
The filters assist you in finding the right TVDA
Quick overview of the TVDA
The System user guide contains detailed information on the TVDA, including...
System architecture
General information about the hardware: Controllers,...
...Field devices,...
A wiring guide for the different communication networks
Am implementation guide - Controller implementation
And a system setup guide
Consistent and easy to understand project structure - All device specific application code grouped in folders
Complete code to operate field devices (E.g variable speed drivers)
Complete code to monitor device status
Pre-built HMI application to monitor and control the whole system. System status overview, Alarm management, Direct manual device operation and System energy consumption dashboard
Fast removal of a field device
Remove the device from the device tree
Remove the IO point
Delete the application code
Remove the device form the communication state parameter
Remove the device from the error message parameter
Remove the device from the energy meter parameter
Remove drive command variable from the local operation mode control
Remove the device form the master call
Compile the code
Fast integration of a new field device
Assign a name to the device
Select one of more than 30 Device Modules to integrate to you project
Assign the fieldbus address
Select an IO point to monitor motor circuit braker status
Embed application with "OK"
Fast addition of a new device
A new device has been added to the Device Tree
The device name defines the name of the device specific variables
Embedded code consistent tot the overall project structure
Preconfigured application code
Selection of the device communication state variable defined in GL of the inserted application code
Add error status variables to generate an error message parameter
Assign drive status variable to the energy metering mode control
Assign drive command variable to the local operation mode control
Compile the code