Hi everyone, Welcome back to geardo,
Today we will show you how to replace the charging port board
on the Samsung Galaxy s20 mobile phone. To start, we need to have the right tools
to proceed with the repair, which You can find in the description.
First, Take out the Sim tray and then the back cover removal.
To remove the back cover, it needs to heat gently
around the back cover edges until the pasted adhesive becomes soft.
For this, we are using a heating pad. Place the back cover side on
the heating pad and Select the mobile phone HEATING option and leave it till
it completes. Alternatively, you can use a heat gun or hairdryer.
Once the heating has completed,
Use a suction cup to create an opening between the frame and rear cover.
Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.
Next,
take out the back cover. And, undo five screws and disconnect the connector
to take out the wireless pad. And also disconnect the battery plug.
Next, move to the bottom and take out the speaker cover by undoing five screws.
Next, unplug two main ribbon flex cables from the secondary board.
Next, undo three screws and lift the broken charging port board using a pry tool tweezer.
Next, Place the new charging port board and
secure two connector plugs and three screws into the board.
Next, place the speaker cover by securing five screws.
Next, secure the wireless pad by inserting five screws and the battery plug.
Next, add the sim tray and place the wireless pad by securing five screws and the connector.
Next, Before installing the main back cover, make sure it has enough glue on it.
If not, use B7000 glue or a new double-sided back cover adhesive.
Finally, we are using screen binding clips to tighten the back cover to the body.
If not, you can use rubber bands and leave them for some time.
I hope you have enjoyed the replacement guide.
Let us know if you have any questions; please share and comment on our videos.
Do not forget to hit the subscribe button.