- Hello everybody.
Welcome back to my channel.
If you're new here,
my name is Tommy.
I am a papier-mache artist
and in this video
I will be showing you
how you can make your very own You Can Think Pad.
(beeping)
- You should be doing your homework.
- He's kind of a creep.
Enjoy the video.
- Welcome to Tommy's Puppet Lab.
- Enjoy the show.
- All right, so in this tutorial
we will be making a You Can Think Pad.
So you will need a sheet of cardboard.
So we're just gonna trim it.
(upbeat music)
You should make sure the sides are rounded off.
So this is what you should have so far.
So, we trimmed the sides off.
Just rounded it.
So now we need to draw
three circles and a square
on the left side.
So we have three circles here.
Now we need to draw a square.
Like that.
And just right beside the square
we're going to draw a rectangle.
So, this is where the answers go.
This is where the check mark and the X's go
and this is where Baldi's face is supposed to show up.
So now we draw a large square.
So this is what you should have.
This is where we need to cut.
So, just be careful
when you're doing this part with scissors.
Scissors are very sharp and pointy.
Do get an adult to help you with it if you need it.
Always cut away from yourself,
never towards yourself.
I say that a lot.
But that's so important.
Okay, and this is what you should have so far.
It doesn't look very good right now.
But we're gonna fix that right now.
So we're gonna need another small sheet of cardboard.
And we're gonna put this on top.
So, what I'm gonna do
is I'm going to glue this
onto this sheet of cardboard.
You can use hot glue or tape if you want.
But I'm gonna use glue.
So we're gonna put some glue on the cardboard.
I'm gonna put some glue
at the bottom of our Think Pad.
Okay, so the bottom of the Think Pad
is all pasty now.
So we're just gonna put this down.
We're gonna let that dry.
So I'm gonna put two blocks on top here.
And I'm gonna put a book on top of it
so that it dries nice and flat.
It's important that it gets air flow
so that the glue can dry properly.
Okay, so I let the glue dry.
It's just a little bit wet here
but that's all right.
So what I'm gonna do
is I'm gonna trim
all this cardboard around it.
And there you go.
I'm just gonna take some scrap cardboard here.
We're gonna draw the antenna.
Which is a triangle.
Like that.
A large oval.
Like this.
And a circle.
We're gonna cut these out.
Okay, so we're gonna attach everything.
So, we need to attach this.
So, we're just gonna cut away a little bit
at the bottom of this oval.
So that can fit on better.
I'm gonna use masking tape.
And I'm just gonna tape that on.
You can use hot glue if you want.
Just remember your gloves.
And that's what you should have.
Now we're gonna tape the antenna
on the side like that.
Just like this.
And then this circle here
goes on top of the antenna.
And this is what you should have.
It is now ready for papier-mache.
So let's get to that right now.
Okay so, we're gonna be doing papier-mache.
So you will need to mix
one part glue and one part water.
I use white glue
because it has no fumes
and it works really good.
You'll also need a paintbrush.
Brush it onto the cardboard.
All right.
You'll also need some tissue paper.
I use toilet paper
because it's cheap
and it works really well.
Use a strong brand.
So, what we're gonna do
is we're gonna cover the cardboard
with the tissue.
Just push down where we had cut the holes.
Like that.
Can you see that?
So, make sure you do that.
We're gonna cover it up completely.
So, now what you wanna do
is you wanna brush glue
on top of the tissue.
Just like that.
And we're gonna put some more tissue on top
and we're just gonna do the same thing.
You wanna have at least two,
at least two or three layers.
So, let's do it.
And this is what you should have so far.
So, it should be nice and hard.
Don't forget to cover
the back as well.
So, we are ready to paint the Think Pad.
So, let's get started, shall we?
Okay everybody,
get out your paintbrushes.
It's paintin' time.
So, what colors will we need?
We are definitely gonna need green
and we will need a little bit
of silver for the antenna.
Some purple.
And we will also need some white.
And don't forget the red
for the antenna as well.
These are all the colors
that you will need.
White, green, silver, purple, red.
(upbeat electronic music)
And this is what you should have.
Pretty nice, eh?
Now you too can make your very own You Can Think Pad!
Well, I hope you enjoyed that video.
Thank you so much for watching
and I'll see you all next time.
(beeping)
- You did not finish your homework, did you?
- Bye!