hey guys part two of the note 20 ultra screen replacement this is the new screen
that i got from my supplier we are going to transfer all the component that we removed
from the old screen the broken screen onto the new screen let's start at the bottom
of the device with the charging port flex cable make sure you align the charging port
with the holes that it has to align with add the two retaining screws at the vibrating motor
and at last the charging board itself this is the PCB board that makes all this component
work together after all this make sure all the component that you just installed are firmly
seated adding the only screws that is holding the pcb board then we are going to install the
motherboard push aside all the flex cables that are in your way we do have multiple flex cable
on the right of the device and carefully insert the motherboard inside the device we are going
to install the battery this battery has already double sided tape on one side so this is pretty
much it we just need to connect all the flex cables and verify that we did everything correctly
and test the device but only connect the battery flex cable when you're ready to test the device
next we are going to attach the 5g antenna at the left of the device this piece of component
also has double sided tape at the bottom of it so if you do not have the double sided tape
you can insert the 5g antenna without it after that connect the flex cable to the charging module
board install the other 5g antenna that is going to be at the right of the device check again to
make sure that all the connections are made and let's clean this in-screen earpiece this particle
must have entered where the screen was broken and they were blocked at the speaker level
this shows you how water can enter from the front of your screen inside the speaker and
then go to damage the other component especially the motherboard which is directly attached to the
in-screen earpiece i had a problem while working with this screen there is a screw that was left
on the screen that i received but the screw was stripped and it was nearly impossible to remove
the screw with my tools so after trying everything i decided to test the device to make sure that
at least the device the screen is working the screen seems to be working perfectly
test all the cameras to make sure that you have inserted all the flex cable correctly then turn
off the device and we are going to try something if it does not work we will try something else so
you can see there is no thread left on this screw very important let's remove the battery cable and
try to remove it with a vise grip so i have tried like for 10 minutes to remove this screw
i feared that i cracked the screen while doing this operation so i decided to left this screw
alone and try to solve it in another way because pulling too hard on this screw you can damage your
screen and it will be a total loss so i decided to cut the hole the screw has to sit in after cutting
some piece of plastic i try to make sure that it is working my solution is indeed working and i
will add all the screws later and test the device again to make sure that i did not crack the screen
while trying to remove this stubborn screw at the wireless charging pad connect all the flex cables
that comes with the wireless charging pad these are the only screws that are different
from the others and these are the screws that goes on top of the 5g antennas add the sim card tray
check the device to make sure that you have installed everything and we are going to test
the device to make sure that everything is working the part 3 of this repair is coming
soon the part 3 will be replacing the back cover the back glass is badly cracked and we are going
to replace it in the part 3 of this note 20 ultra repair videos if you like these repair videos
subscribe to our channel give us a like it will help our channel get discovered by more people