Hello. Today we will see the procedure to install our PIXMA G550 printer. Go for it!
We already have our PIXMA G550 printer ready to be installed.
Also, we have our ink bottles ready.
and finally have Print Heads ready.
The first thing we will do is plugging in our printer
Then, you´ll click on the Power button
and then the printer will ask us to select the language in the LCD.
Once this is done, the printer will ask us to install the Print Heads.
The procedure is very simple:
We lift the lid of the printer and prepare the Print Heads.
Remember that there are 2 Print Heads
and are marked with the letters "R" and "L",
"R" from English "Right" And "L" from English "Left"
We remove the 2 seals, which we throw to the Recicling Area
We lift the lid of our printing carriage.
and we install the Print Head with the letter "L" in the place marked with the letter "L".
You can also find the letter "L" at the top of the lid.
Drop the Print Head and it will fall on the carriage easily.
We repeat the operation with the Print Head marked with the letter "R".
and install it in its corresponding place. It is very simple.
It only remains to lower the lid until you hear a "click",
and press the buttons found at the top of the carriage until you hear a click.
Now the installation of the Print Heads is completed.
The next step will be to refill the ink into the printer.
Notice that each bottle has a different shape on the nozzle,
This is to avoid any possible color confusion.
and, as example, not to load the gray ink into the red ink tank by mistake.
The way to do this loading of the ink is very simple.
We lift the cap of the gray ink color, insert the bottle and let the ink fall...
The ink will fall on its own into the tank without moving it or squeezing the bottle.
I keep quiet so, you can hear how the ink falls into the tank. Listen...
While the gray ink is being filled, we are going to complete also the filling of the red ink. We lift the lid, put the bottle and let it fall.
We repeat the procedure with the Magenta ink.
Finally, wait a few seconds. You can see the procedure is very simple, fast and totally automatic.
We have already filled the ink with 3 of the 6 colors that the PIXMA G550 needs.
It´s been very simple, fast and clean, the ink does not drip.
Let's go with the filling of 3 colors left...
Well, we already have our inks loaded,
so we finnaly remove the ink bottles and close the caps.
The procedure is very simple and we´ve almost finished installing our MEGATANK printer.
Close the lid, let the printer load the ink into the equipment, and...
This is all. Installing a Canon MEGATANK printer is
very simple, fast and, what is most important, clean.
Now, all you have to do is get down to business with your printer.
Bye!