This is a quick look at the Milwaukee grinder kit, which includes 2880-20. That's the M18 Fuel
four and a half inch slash five inch grinder. Has a brushless motor, and comes with
a five inch type 27 guard as well as a five inch type 1 guard. The convenient thing about
it is the type one guard just slides right over the twenty seven so no need to swap out guards.
The guard lock provides for quick and easy guard adjustments,
and this is the paddle switch version of the tool. There's also a switched version, which
has a switch own top. That's model 2881-20. Also has a dust screen to prevent debris from getting
into the vents. You just pop it off and clean it out. Anti vibration handle has two positions. Here
or here. And this particular model does not have a position on the top for the handle,
but of the grinders I've used that actually have it, I actually never use it. Spanner wrench,
manual, and the kit includes two XC6 high output batteries, that's awesome, rapid charger,
and the fuel contractor bag. Unfortunately, the fuel contractor bag does not have any
pockets on the inside to store cutoff wheels. Not that you're supposed to store cutoff wheels
in there anyway. It does however have two pockets on the outside if you need them.
There are no cut-off wheels included, so when you
pickup your grinder make sure you pickup some cut-off wheels. The arbor size of this tool is
5/8" 11. Eleven being the number of threes per inch on the spindle for brush wheel accessories.
5/8 being the inner cutout of your cut-off wheels; however, the tool can accommodate cutouts of
7/8" of an inch as well. Depending on the thickness of your your wheel, uh,
you may need to flip this flange nut over. Maximum capacity is five inches uhm
and maximum width is a 1/4 inch. It's a really nice tool. Looking forward to using it.
It doesn't break that quickly. Definitely has some pull when it starts up, but it's pretty powerful.
I also notice there's a little shimmy in the guard when it's running,
but this is a five inch guard and this is a 4.5 inch wheel. Technically you should be using a
4.5 inch guard with a 4.5 inch wheel and uh I'll just take one
from my other Milwaukee grinder. Hope this video's been helpful. Thanks for watching.