THIS VIDEO HAS NO AUDIO
[Installation of the HP Color LaserJet]
[Managed MFP E77422-28 and the Y1F97A Dual Cassette Feeder]
Open box and remove protective foam.
Place plastic bag around sides of unit.
Tip package on its side.
Remove unit from box.
Place unit on rollers.
Remove blue tape and protective foam as shown.
Remove plastic packaging.
Remove package tape.
Lift box over unit as shown.
Remove plastic packaging and protective foam as shown.
Remove center unit and set to side as shown.
Place machine on top of roller unit as shown.
Remove blue tape and protective foam as shown.
Continue removing blue tape and protective foam as shown.
Open paper trays and continue removing tape as shown.
Remove blue tape from side of machine and tray as shown.
Remove screw and caution label as shown.
Unbox parts as shown.
Remove end caps as shown and place in box.
Remove plastic packaging.
Holding cartridge horizontally, tip side to side six times.
Repeat for all cartridges.
Remove part from protective foam and set foam to the side.
Remove part from plastic packaging as shown.
Remove protective cover as shown.
Remove orange tab as shown.
Remove protective sticker on front panel as shown.
Open panel door.
Tip toner cartridge side to side and place in machine as shown.
Remove orange tab as shown.
Slide cartridge into place.
Turn blue tab to right to lock cartridge in place.
Tip next cartridge back and forth.
Remove orange tab as shown.
Slide cartridge into machine and lock into place as shown.
Tip next cartridge side to side as shown.
Remove orange tab as shown.
Slide cartridge into machine and lock into place as shown.
Tip next cartridge side to side as shown.
Remove orange tab as shown.
Slide cartridge into machine and lock into place as shown.
Remove panel as shown.
Disengage part by pressing gray tab down.
Remove orange handle as shown.
Continue removing orange handles.
Slide cartridge into place as shown.
Lock in place by flipping gray tab up.
Slide next cartridge into machine as shown.
Lock into place with gray tab.
Slide next cartridge into machine as shown.
Lock into place with gray tab.
Slide last cartridge into machine as shown.
Lock in place with gray tab.
Make sure all cartridges are locked into place.
Replace panel as shown.
Close front panel door.
[Upgrade firmware with the latest available on hp.com.]
[Insert a thumb drive at the connector on the control panel]
[and select the following:]
[Support Tools > Maintenance > USB Firmware upgrade]
[Note: All accessories must be attached]
[when upgrading firmware.]
[Accessories attached later will not update automatically.]
[Find HP online:]
[hp.com/SupportVideos hp.com/Community]
[Twitter, YouTube, Facebook@HPSupport]
[HP]