Hi, [INAUDIBLE].
Joe here, from Alarm Grid.
And today we're going to show you
how to update the firmware on a Lynx touch panel,
using the new LYNX Touch MSD tool.
Now I have one of these right here.
And this thing is super convenient,
as it's going to allow you to update
the firmware on your Lynx touch panel,
without having to get it remotely
downloaded from the internet and AlarmNet.
So we have an MSD tool right here.
And what this thing does, basically,
is allow you to put the latest firmware right here
on this micro SD, install it on the tool,
and then we're going to install it
in the Wi-Fi slot on our panel.
And it's going to allow us to locally update
the firmware on the panel.
Just to show you how this works, let me slide up this protector
right here and display that--
that's the micro SD card.
When you purchase one of these tools,
it'll have the latest firmware on it.
But you could also take the card out and update
the firmware on the card by plugging this into a computer,
downloading it, and you'll be good to go after that.
So I'm just going to reinstall it and its slot.
If you ever have to do this, it's very easy.
You just place it in its holder and press down
until it's flush.
And then take the holding bridge,
put it down, and slide it into place.
And that'll lock it right on.
So you're good to go.
So what we're going to have to do
is-- we're going to have to fully power down the system,
we're going to have to remove the Wi-Fi card,
then we're going to install this in the Wi-Fi slot.
Then we're going to power up the system or hold in the Home
button.
And then we're going to use these two buttons to navigate
and tell it what to do, just basically update the firmware.
After we do that we can power the system
back down, remove this, put the Wi-Fi back in,
and we should be good to go.
So let's do that.
So I'm just going to open our Lynx panel up
and the first thing I'm going to do
is unplug the backup battery.
The next thing I'm going to do is undo the main power
connection.
And as this is on an LT cable all I have to do to do that,
is unplug the barrel connector.
So I'm going to put this on the side.
Actually I'm going to put this right here.
Great.
So now, as you can see, this is our Wi-Fi module, right here.
So what I'm going to do is, I'm going to slide this out,
put it to the side and somewhere safe.
Now I'm going to slide the MSD module onto the connector.
I just want to make a quick note about the Lynx system,
with powering it down.
Depending on how you have it plugged in,
may change how you do this process.
You're, likely, either going to have it connected via an LT
cable to its transformer, or you'll
have it connected via a piece of wire
to the transformer, which is plugged into the wall.
If you have the LT cable, the barrel connector,
you should be able to get it from right here at the system.
But, as we discussed, you have to have the Tamper button
pressed down for this process to work,
when you're doing this firmware update.
So when you plug in the LT cable,
it may be a little difficult to get the system all closed up,
the button pressed down, before you're
able to hit the Home button.
For that reason, it may be easier
to have the system closed up, with that Tamper
button pressed.
And then go to the wall and plug in the transformer.
And then run back to the system and hit the Home button.
Again, the reason that I say that,
is that, if you have your LT cable here--
you take it out, you plug it back in.
You're going to have to get this cable flush into the wall
and then get the system up and clicked
into its base to press the Home button, to do this process.
Because that is kind of troublesome,
it may be easier just to go to the wall where it's plugged in,
unplug the transformer after you've
undone the backup battery at the system,
plug in the transformer, run over to the system,
press and hold the Home button.
And then you'll be able to do the process.
The easiest way to do it, is to find a friend or family
member to help you with this.
And then you'll have no problems at all.
And for this process the Tamper can't be active,
which is why I'm closing up the system 100%.
So I'm just going to keep this held down.
And, as you can see, it says press Home key to return,
so I'm going to let go.
And now we're on the menu that we want to be at.
So Panic button, as you can see on the bottom, is next.
And Home is Select.
So I want to go down to update and then hit the Home button.
I'm going to go down to File System, hit the Home button.
And then I'm going to go down to our firmware, which is this bin
file, right here on the bottom.
And I'm going to click the Home button again.
So, as you can see, it's performing the firmware update.
And now it says press Home key to return.
And we're all set.
So it has updated, so I'm going to go ahead
and power down the system again.
Now, for this next step, you don't
have to unplug it at the transformer,
if you have an LT cable installed on the system,
because it makes your life a little easier.
We'll undo the backup battery and then, as you can see,
we have used an LT cable on the system.
The cord just dropped down behind the system,
but the system is now definitely powered down.
So with that set, I'm going to go ahead and remove my MSD
module.
So, as you can see, a helping hand
has pushed the barrel connector back up through.
If you do have one of these installed
in the system for that very reason--
when you do unplug it from the main barrel connector,
take it and put it somewhere so it
doesn't slip and fall down the wall.
The system, now, is fully powered down.
Next I'm going to remove my MSD module.
I'm going to slide this out, put it to the side.
I'm going to reinstall my Wi-Fi module
and then I'm going to power the system back up.
So now the system is powering back up.
That's how you update the firmware, using the MSD module
on your Lynx touch panel.
If you have any questions about this process--
how to use it--
or, if your system does need a firmware update,
feel free to reach out to us--
8-8-8-8-1-8-7-7-2-8.
You can also send us an email to support@alarmgrid.com or head
to our website-- www.alarmgrid.com.
If you did enjoy the video, feel free to subscribe.
And if you want to be updated when we post future videos,
hit the notification button below
and I'll send you an update when we do so.
Thanks for watching and have a great day.