Hey guys! How are you? Welcome to another episode of Tools...
my coffee
Tools and Coffee
How are you guys? Welcome to another video
today will be a simple video
today we're going to talk about Dremels
"Edgar, you're going to do a dremel video??"
Of course, a simple video to...
to recommend you two dremels that I've used
especially this one, is a new one
which, to tell the truth, surprised me a lot
let's move here and first
I've always used this dremel
I think it is Sunshine brand
I think it is discontinued, I think
but I'm going to recommend it anyways
now, something I like about this dremel
is that it has a memory section
we can change to many tips
it has many tips
I am currently using one of these, as a polisher
this is made of metal, so it helps me to cut
literally, this has been my dremel for a long time
actually, if
I look here, I don't know where, give me a sec, I'll look for some tips
so I've always had a lot of tips
for this dremel
Another thing I like about this dremel is that you can easily change the tips
we just have to press here
we turn it and take it out
place another tip and press here
and that's all, ok now
let's remove this
and put this one
This dremel is very convenient
let's bring it's cable
I think it works with a charger of 12 Volts
10 Volts
so, this goes here and
and here we have a knob to adjust the speed
this dremel is perfect, I've been using it for many years
honestly, it's been a long time using it
now, lately I have been recommended this dremel, it's MaAnt brand
this dremel is good for many reasons
first, it's very small
see, this is basically the cutting tip
right? Very nice
and this has 3 speeds
this is speed #1
this is speed #2
this is speed #3 and that's all
you can charge this dremel via USB
here it has a Type C port
it needs 5 Volts, you can charge it normally
also comes with this hex wrench, which helps us to change the tips
to change to different tips
this is something that I didn't like about this dremel
I always have to look for something wrong with things
but that's the truth, I didn't like it
just look how easy with this one, just grab here and that's all, remove it, right?
but with this one we have to take out the key, look for the hole
give it some turns, then change the tip, use the key again, if we lose it
we'll have to look for another one
I don't know, that was something that I didn't like
but it's a very good dremel anyway
the last time I bought a blue dremel
and I didn't like it because it doesn't have the same power as this one
Let's go to the microscope
and let me show you, this is a typical Tristar repair
I have a little more practice so many times I don't need to cut this shielding
but here we have the shielding, the problem here is
look how big this is to cut this part
it's too big
while if we use this, we will have something small to work with
and look at the power of this dremel
I'm currently at speed #3
there
and there
has already been cut
I'm going to lift this
but look, it has been cut
Believe me, this dremel has good power
it is currently at speed #3 and look
look, it cut it without problems
the metal
right? So that's something I liked
So, I'm currently using this dremel
I have this one for more difficult tasks
for that I use this
but honestly, I like this one better
so, these are the dremels I use
nothing out of the ordinary
but these are things we need to have in our workshop
Remember, I'll leave the links of these dremels in the description of this video
it was a pleasure for me to come and say hello to you
and bring you another episode of Tools and Coffee
we'll see you in the next episode, bye!