Hi everyone, Welcome back to geardo,
Today we will show you how to replace the lcd screen on Xiaomi Redmi Note 10 5G Mobile
phone for repairs.
To start, we need to have the right tools to proceed with the repair, which You can
find in the description.
First, turn off the phone, and then follow the back cover removal.
To remove the back cover, it needs to heat gently around the rear cover edges until the
pasted adhesive becomes soft.
For this, we are using a heating pad.
Place the back cover side on the heating pad and Select the mobile phone HEATING option
and leave it till it completes.
Alternatively, you can use a heat gun or hairdryer.
Once the heating has completed, Use a suction cup to create an opening between the frame
and rear cover.
Next, insert a plastic card pry tool or something similar to cut the adhesive around the back
cover.
Take out the rear cover and take out the Camera Lens frame by undoing screws.
Undo four screws, lift the camera lens cover using a pry tool.
Next, Take out the sim tray and Disconnect the fingerprint plug.
Next, take out the midframe by undoing 13 screws on the top and bottom sections.
And then, Using a plastic card pry tool, create an opening to separate the back cover frame.
Be gentle and workaround on the edges to disengage the plastic clips.
And Next, from the right-hand side, disconnect the battery plug.
Next, take out the battery by loosening the adhesive.
First, loosen the adhesive on both sides, and then lift it using the tab.
Next, unplug the lcd plug and both antenna heads from the board.
Next, take out the logic board using a tweezer.
Be gentle in this process.
Next, apply little heat and take out the Earpiece & button unit from the body.
Next, move to the bottom part, lift the loudspeaker buzzer, and then lift the charging board,
by disconnecting the other LCD connector plug.
Next, apply little heat and take out the vibrator motor from the body.
Now the only remaining part is the broken front screen assembly with the frame and buttons.
For the replacement, there are two different screen types in the market.
The one is with the frame, and the other one is without the frame.
It can be original, used, or aftermarket.
Either version you choose, you can get with the frame and without.
But the most straightforward repair will be with the frame, and also, the price difference
is not that big.
I would recommend you to go with a screen with a frame & buttons installed.
It can be original, refurbished, used, aftermarket.
And this type is commonly available to purchase.
Next, on the new screen frame, start placing removed parts.
Next, Place the earpiece & button flex on the frame.
Next, Place the logic board in the body.
Next, place the vibrator motor in the body.
Next, place the charging port board in the body.
Next, place and secure both antenna heads to the board.
Next, place the speaker cover.
Next, Place the battery with adhesive.
Next, secure the battery connector and place the midframe in the body by securing thirteen
screws.
And also, secure the sim tray and fingerprint connector.
Next, place the camera lens frame by adding four screws.
Before installing the main back cover, make sure it has enough glue on it; if not, use
B7000 glue or a new double-sided back cover adhesive.
Finally, we are adding bonding clips to tighten the rear cover with the body.
If not, you can use some rubber bands and Leave them for some time.
I hope you have enjoyed the replacement guide.
Let us know if you have any questions.
Please, like, share, and comment on our videos.
DO not forget to hit the subscribe button.