- Welcome back to Chemical Guys Detail Garage.
So in the past video we went ahead and cleaned up
all the undercarriage, we cleaned up the tires,
the wheels, and got all that nasty mud off of it.
So now its time to clean the body of the truck
to reveal that beautiful blue shine.
What I'm gonna go and use its gonna be my big
mouth foam cannon, with my two bucket method.
I also have my dirt traps at the bottom of it
so it can cause some filtration while wash,
and I'll be rubbing the same grind all over it.
So the soap Imma be using today is gonna be Tough Mudder.
Tough Mudder is a citrus based product that
hugs onto to all the grind and pulls it off
without scratching it. So what I'm going to do
is I'm going to is I'm going to prep my buckets,
apply about like two ounces of soap inside my
bucket and then about an ounce. Nah make it two
since its super dirty, inside my foam cannon.
So I'll put this down right here.
I'll go ahead and put, a cap on, and then
whenever you mix it you never want to shake it because
if you go ahead and shake it
you might cause some foam in there.
Alright so now that my press washer is on as you
guys can hear, Imma go and rinse down this
beautiful SVT Raptor, just to knock off all the,
all the light grime I can get off
and make washing easier. Lets get to it!
So after reading rinsing down the Raptor ,
there's still grime stuck on there.
So that's why we're gonna be using our big mouth foam cannon
and out two bucket method system to wash it off.
So in this bucket there's already Tough Mudder from before
when I had to pour it in. And Imma be scrubbing it down
with our Big Mofo Wash Mit. So all you gotta do
is simply, unattach your pressure washer tip,
and attach your Big Mouth Foam Cannon,
and its time to foam away. Oh wait I almost forgot,
the Big Mouth Foam Cannon can be adjusted from
vertical to horizontal. So let me go ahead and adjust it.
Lets get started.
Alright guys so I already foamed it up once and
I already rinsed it down once, so its time to re foam it.
The reason why we're gonna foam it up two times,
not four, two times is because we don't want to install
any more scratches and swoles out the paint it already has.
The truck came in here with a lot of mud,dirt,debris
on the undercarriage, the paint especially
and we wanna remove it as safely as possible
so lets get to it.
As you guys can see, this beautiful SVT Raptor is
finally clean. It came in here neglected, mud was
stuck on the undercarriage, the undercarriage was
thrashed and we went ahead and took care of it.
First of all we went ahead and cleaned up the tires,
the wheels,the whole undercarriage, and after that
we went ahead and foamed it up twice to reduce
its chances of scratching the surface of the paint.
The reason why we foamed it up twice
was because the dirt was stuck on there.
We don't want to be rubbing all that dirt into the paint.
And now, its time to dry. So Imma be using the
Wooly Mammoth, by just throwing it onto the surface,
Imma damp it, and after its damped Imma lift off
and it starts drying the entire surface.
You could also drag it if you want to but
I'm just going to pat it down and remove it.
Alright guys, if you guys liked this truck and you guys
liked this video, and you guys think I did a really good
job cleaning it, please like and subscribe.
If you guys don't, I'll lose my job.
Nah, I'm kidding guys so don't forget,
drop a comment down below and
let me know what kind of videos or cars you guys
wanna see right here in the detail garage
and we'll get to them. Thank you so much
for watching and we'll see you guys next time.
Right here at the Chemical Guys Detail Garage.