Hi my name is Cyndie, I'm from the Dell Networking Team. Today we are going to update
the Dell switches from 10.5.1.7 to 10.5.2.4.
Before we get started I'm going to point out that we need to reference the support matrix.
The support matrix will show all the versions that you should be on for that baseline.
Today we are going to 10.5.2.4 which means OMEM should be on 1.30.00.
In my chassis we are already on 1.30.00.
Normally we could download the package on support.dell.com, but starting on 10.5.2.4, the
update package is actually available through the MX catalog, so we're going to go ahead and log in.
So once you're in OMEM you're going to want to create a catalog.
So you're going to go to 'Configuration', 'Firmware Compliance'.
Once in 'Configuration', 'Firmware Compliance' you're going to click
on 'Catalog Management', and we're going to add a catalog.
You have several options. Because the MX is very baseline oriented,
I'm going to choose 'Validate firmware solution baseline on dell.com'.
I'm going to choose 'Manually', but you do have the option to choose 'Automatically'.
I'm going to go ahead and click 'Finish'. Once our catalog is finished - it's already been,
it's already pulled the the latest version, but for future reference you could click
'Check for updates' and it will it will download any updates that are available.
So we're going to return back to 'Firmware Compliance', and we're going to create a baseline.
We're going to choose the 'Dell Networking' baseline we created and then we're going to
name the baseline. Sorry, we're gonna we're gonna choose the catalog we created, and then
we're gonna name the baseline. We're gonna go ahead and click 'Next'. Now it doesn't matter
which one you choose, you could do it by the device or you could do it by groups. Either option
you're going to choose 'Network IOM' and under this section you're going
to go ahead and choose your switches. In our case we are upgrading the MX9116ns,
so I'm going to go ahead and and choose the a1 and a2 that I have in my chassis.
Go ahead and click 'Finish' and then click 'Finish' again.
Once the baseline has been created, you could view the report from here so you could select your
baseline and then click 'View Report' and then you could look at the items that are in it. You
could see that we are currently on this version, and the baseline version is going to be 10.5.2.4.
From here we're going to go ahead and kick off the update. So we're going to go to 'Devices',
'IO Modules', and we're going to select one of our switches.
Because these switches are in SmartFabric we don't need to select both switches,
we just need to select one of the SmartFabric switches and it will it will push the updates to
the other switch that's in SmartFabric. From here we're going to go ahead and click 'Update', we're
going to select the baseline, and you can see here when we reviewed it's the same kind of view so,
and it's already selected so we don't have to do anything else but click 'Next'.
We can schedule updates, in our scenario we are going to update now rather than schedule later
and the server options we simply ignore because we're updating switches. Go ahead and click
'Finish' and then 'Yes' and the job is submitted. So to review, or I guess monitor the job you
would go to 'Monitor', 'Jobs'. Go ahead and 'View Details' on that running job, and in this window
if you scroll down a little bit it's going to send the update package and it's gonna it's gonna start
the process. As you can see it's running. This process can take anywhere between 30 and 120
minutes. Usually you just sit and let it complete or if you're like myself go into the switches and
you start seeing what's actually going on. The Dev Update Packages will get pushed to the image
directory on the switches. When the package is done uploading or downloading to the switch it's
going to appear in the image directory. I'm going to give it a few minutes and then we can look
to see where the packages are. The switches are going to update the SmartFabric backup node first,
and you could identify which node that is by doing 'show smartfabric cluster'. A1 is currently the
backup and A2 is the master, so the first switch that will get an update is going to be the A1.
As we can see here the transfer progress it completed a hundred percent, and we are currently
on package three of nine in the install. You can see the installation state is at 'install',
and if we go ahead and look at the other switch you could see that nothing has
started. Also good information, if you look at your image directory you will see the file
is transferred there. It's not quite the name that is recognizable, when you download the bin file
from Dell usually it has a user-friendly name but this is the file, it's the bin file. We
can sit here and and watch the upgrades as they happen it will take quite some time. It's average
20 minutes per switch, but again we like to say it's anywhere between 30 minutes to 120 minutes.
If you're only looking at OMEM you do see that it's upgrading that node
that we are looking at, so we're just going to allow this update to finish.
So I do see that one of our switches has reloaded. I'm going to go ahead and log in and take a look.
There we have it, we're on 10.5.2.4 on one of the switches.
This switch is currently the backup, we currently see all our networks,
and we do see that our VLTi link is up. Let's go ahead and look at our other switch.
So we do see that the image is present, and we do see that we're on five of nine of the update,
and if we look at OMEM it does say that the other one has started.
The second switch rebooted and it is back up, let's go ahead and take a look at it.
We do see that we are on the latest version 10.5.2.4,
and check out 'smartfabric cluster', this is now the backup.
I'm going to check out the VLT. It appears that we are on the latest, greatest. We're going to go
check now in OMEM, it shows the job status is finished and completed. We're going to scroll
back up to the top and there we go. We see it's completed and it was completed with no errors,
and to go ahead and look at the versions in OMEM.
We should be able to see it once it loads. There we go. There's a1 let me go to a2,
and there it is.
And that concludes our video. Have a great day everyone.