okay everyone thank you once again for tuning into our youtube channel would
appreciate it if you would hit that subscribe button down below so you can
continue following us here on youtube as we do produce videos here and there to
save you money and save you green so in this case we're gonna talk about
something if you nutribullet or nutri ninja owners might face and that is a
screaming module so you will turn it on and you hear a light screaming noise and
you're wondering it's time to throw away the whole system and get a new one a lot
of times you might think it's even your base but it's not it's basically this
part so this base is the one I'm referring to not the actual motor so a
lot of people think it's the motor and they'll throw it away but what you want
to look at is this little base here where the blades are connected to and
with this simple fix you'll be able to make it work
like if it were brand new so what you're gonna do is gonna get some olive oil and
you want to use olive oil because it's something you can consume you don't want
to put wd-40 in here and you basically just want to put it all over the place
here just like like you're seeing me do here and then just turn it over and do
the same thing on the other side just like so okay and and a lot of times you
would try to move this and you can't it's just like jammed in there really
good it's almost like it's locked once you're done with that you want to
put it inside one of these containers and you want to just screw it in there
and what that's gonna do is it's gonna not let any air get into it for a little
while while the olive oil in there sits and then right around this side here
you're going to want to go ahead and pour olive oil on it and you might have
to pour some more all around it and it's just gonna seep in there now what you
want to do is you want to leave that in there overnight and as you as you see
there I'm just letting it get all around you see that and feel free to put
more in there again put put the olive oil in there let us sit overnight and
we're going to go ahead and let it sit there for a little bit and come back
okay folks once you let that sit overnight I'd say at least eight hours
eight to 10 hours overnight you can come back the next day and remember how that
blade was just locked in there you will see you will see now that it just spins
freely and what you'll see is when you're running it on your actual motor
that it's gonna not scream like it used to so you won't hear that high-pitched
sound that you were hearing before when it was running and it's basically
because there's ball bearings in there and as it gets a little older you know
you get dust and all kinds of particles in there's just gonna have a hard time
turning but you can see now how easily it turns and what you want to do after
that you can see some of that olive oil falling in there and you'll see what you
want to do after that is when you store it is not stored like this or like this
on your sink but rather just store it sideways and you'll get the most optimal
performance out of it without having to spend another I don't know 70 80 90 100
dollars on a new system when all it needed was just to have this taken care
of again a lot of owners think that it's the actual motor and they'll throw
everything away when in reality the reason why it's making that high-pitched
sound is because the ball bearings in there just need to be lubricated simple
as that so thank you very much for watching if you like this video if it
was helpful after you tried it out please give me a thumbs up please
subscribe to our Channel as we mentioned before we appreciate your support thank
you very much for watching