In this and the next few videos, I
hope to explore different types of regions in three dimensions.
And these will be useful for thinking
about how to evaluate different double and triple integrals
and also some interesting proofs in multivariable calculus.
So the first type of region, and it's appropriately named,
we will call a type 1 region.
At first, I'll give a formal definition.
And hopefully, the formal definition
makes some intuitive sense.
But then I'll draw a couple of type 1 regions,
and then I'll show you what would not
be a type 1 region because sometimes that's
the more important question.
So type 1 region, maybe a type one region R, is the set--
and these little curly brackets means set--
is the set of all x, y's, and z's.
It's the set of all points in three dimensions
such that the x and y's are part of some domain,
are a member-- that's what this little symbol represents--
are a member of some domain.
And z can-- essentially varies between two functions
of x and y.
So let me write it over here.
So f1 of x, y is kind of the lower bound on z.
So this is going to be less than or equal to z, which
is less than or equal to another function of x and y,
which is going to be less than or equal to f2 of x and y.
And let me close the curly brackets
to show that this was all a set.
This is a set of x, y's, and z's.
And right here, we are defining that set.
So what would be a reasonable type 1 region?
Well, a very simple type one region is a sphere.
So let me draw a sphere right over here.
So in a sphere, where it intersects the x, y plane--
that's essentially this domain D right over here.
So I'll do it in blue.
So let me draw my best attempt at drawing that domain
so that this is the domain D right over here for a sphere.
This is a sphere centered at 0, but you
could make the same argument for a sphere anywhere else.
So that is my domain.
And then f1 of x, y, which is a lower bound of z,
will be the bottom half of the sphere.
So you really can't see it well right over here,
but it would be-- these contours right over here
would be on the bottom half.
And I can even color in this part right over here.
The bottom surface of our sphere would be f1 of x, y,
and f2 of x, y as you could imagine,
will be the top half of the sphere, the top hemisphere.
So it'll look something like that.
This thing that I'm drawing right over
here is definitely a type 1 region.
As we'll see, this could be a type 1 type 2,
or a type 3 region.
But it's definitely a type one region.
Another example of a type 1 region-- and actually this
might even be more obvious.
So let me draw some axes again, and let
me draw some type of a cylinder.
Just to make it clear that our domain, where the x, y
plane does not have to be inside of our region--
let's imagine a cylinder that is below-- well,
actually I'll draw it above-- that is above the x, y plane.
So this is the bottom of the cylinder.
It's right over here.
And once again, it doesn't have to be
centered around the z-axis.
But I'll do it that way just for this video.
Actually, I could draw it a little bit better than that.
So this is the bottom surface of our cylinder,
and then the top surface of our cylinder
might be right over here.
And these things actually don't even have to be flat.
They could actually be curvy in some way.
And in this situation, so in this cylinder--
let me draw it a little bit neater.
In this cylinder right over here,
our domain are all of the values that the x and y's can take on.
So our domain is going to be this region
right over here in the x, y plane.
And then for each of that, those x, y pairs, f1 of x, y
defines the bottom boundary of our region.
So f1 of x, y is going to be this right over here.
So you give me any of these x, y's in this domain D,
and then you evaluate the function at those points,
and it will correspond to this surface right over here.
And then f2 of x, y, once again, give me
any one of those x, y points in our domain,
and you evaluate f2 at those points,
and it will give you this surface up here.
And we're saying that z will take
on all the values in between, and so it is really this whole
solid-- it's really this entire solid area.
Likewise, over here, z could take
on any value between this magenta
surface and this green surface.
So it would essentially fill up our entire volume
so it would become a solid region.
Now, you might be wondering what would not be a type 1 region?
So let's think about that.
So it would essentially be something
that we could not define in this way,
and I'll try my best to draw it.
But you could imagine a shape that
does something funky like this.
So there's like one big-- I guess
you could imagine a sideways dumbbell.
So a sideways dumbbell-- and I'll
maybe curve it out a little bit.
So this is the kind of the top of the dumbbell-- or an hour
glass, I guess you could say, or a dumbbell.
It would look something like that.
So I'm trying my best to draw it.
It would look something like that.
And the reason why this is not definable in this way-- it
becomes obvious if you kind of look at a cross section of it.
There's no way to define only two functions that's
a lower bound and an upper bound in terms of z.
So even if you say, hey, maybe my domain will be all of the x,
y values that can be taken on-- let
me see how well I can draw this.
So you say my x, y values-- so let
me try to draw this whole thing a little bit better,
a better attempt.
So you might say, OK, for something like a dumbbell--
let me clear out that part as well.
For something like a dumbbell-- so let me erase that.
So for something like a dumbbell, maybe
my domain is right over here.
So these are all the x, y values that you can take on.
But in order to have a dumbbell shape, for any one x,
y, z is going to take on-- there's not
just an upper and a lower bound, and z doesn't
take on all values in between.
Well, let me just draw it a more clearly.
So our dumbbell-- maybe it's centered on the z-axis.
This is the middle of our dumbbell,
and then it comes out like that.
And then up here, the z-axis-- so it looks like that.
And then it goes below the x, y plane,
and it does kind of a similar thing.
It goes below the x, y plane and looks something like that.
So notice, for any given x, y, what
would be-- if you attempted to make it a type 1 region,
you would say, well, maybe this is the top surface.
And maybe you would say down here is the bottom surface.
But notice, z can't take on every value in between.
You kind of have to break this up
if you wanted to be able to do something like that.
You would have to break this up into two separate regions
where this would be the bottom region,
and then this right over here would be another top region.
So this dumbbell shape itself is not a type 1 region,
but you could actually break it up
into two, separate type 1 regions.
So, hopefully, that helps out.
And actually, another way to think about,
this might be an easier way-- if we
were to look at it from this direction,
and if we were to just think about the z,
y, if we were just thinking about what's
happening on the z, y plane-- so that's a z,
and this is y right over here-- our dumbbell shape would
look something like this, my best attempt
to draw our dumbbell shape.
And so if you get a given x or y, maybe x is even 0,
and you're sitting right here on the y-axis, notice z is not,
even up here, cannot be a function of just y.
On this top part, there's two possible z-values
that we need to take on for that given y--
two possible z-values for that given y.
So you can't define it simply in terms
of just one lower bound function and one upper bound function.