Hi.
I'm Max Dalton, and in this video I'm going to talk through how to put on and remove the
OtterBox Defender case for the Samsung Galaxy S9.
While an OtterBox Defender case can add a bit of extra bulk to your device, it's a great
way to protect your Samsung Galaxy S9.
The OtterBox Defender does not feature any sort of screen protection, but it does offer
two layers of protection in the form of a hard plastic shell that goes over your phone,
and then a soft rubber shell that wraps around the hard plastic shell.
Because it can be easy to break your Defender case (or worst yet your Samsung Galaxy S9)
when either removing the case or putting it on, it's important to know how to do it right.
This video walks you through how to both put on and remove your OtterBox Defender case
from your Samsung Galaxy S9.
And now, let's walk through how to remove the OtterBox Defender from your Galaxy S9.
Step 1.
Slide a finger between OtterBox Defender's outer rubber shell and the hard plastic shell
it's wrapped around to separate the two shells.
You may need to slide a flathead screwdriver in between the two shells to get initial separation.
After you get the initial separation between the outer rubber shell and the inner hard
plastic shell, carefully remove the outer rubber shell from the device.
Step 2.
Look at the back of the hard plastic shell covering your Samsung Galaxy S9, and locate
the eight arrows on the back of the hard plastic cover.
You should see three toward the top of the case, two in the middle, and three in the
bottom.
Each of these arrows points to a plastic clip that will need to be loosened in order to
remove the plastic shell from your phone.
Carefully slide the flathead screwdriver under one of the clips, and then apply a very small
amount of pressure to pry the top part of the clip over the lip.
Repeat this process to loosen the clips around the edge.
When all of the clips are loose, lift the top part of the plastic shell to remove it
from your phone.
Your Samsung Galaxy S9 should now just be sitting in the bottom of the OtterBox Defender
case.
Lift to remove your phone from the bottom of the case.
Congratulations, you've successfully removed your phone from its OtterBox Defender case.
And now, let's walk through how to put the OtterBox Defender on your Galaxy S9.
Step 1.
Place your phone in the back part of the OtterBox Defender's hard plastic shell.
Step 2.
Put the front part of the hard plastic case over the front part of your phone, and make
sure to slide the clip on the bottom part of the hard plastic case into the corresponding
groove under the arrow located in the bottom middle part of the back part of the hard plastic
shell.
Apply a small amount of pressure at each of the eight clip points to lock all of the clips
into place.
Repeat this process to verify that all clips are locked into place.
Step 3.
Finally, slide the top part of your phone into the top part of the outer rubber shell.
After the top part is in place, bring the rest of the edges of the soft shell up around
the hard plastic shell.
Ensure that all port covers are firmly pushed into place, and also slide the soft rubber
shell around clips as necessary.
Congratulations, you've successfully put the OtterBox Defender case back on your Samsung
Galaxy S9.
Thanks for watching.
Click the video link on the right side of the screen to check out another video.
Click the logo on the left side of the screen to subscribe to this channel to see more great
videos like this one.