Hi, DIYers.
This is Michael from Alarm Grid.
And today, I'm going to be showing you
how to factory-default your 2GIG EDGE security system.
So we have our 2GIG EDGE right here.
It's newly installed, great new system.
But if you need to factory-default it,
that's what I'm going to be showing you how to do today.
So a factory default, it's basically restoring one or more
of a set of settings to their factory default.
That's just how the panel comes when
you get it fresh out of the box, fresh from the factory,
it's a brand new system.
This is how it's going to be when you get it brand new.
So maybe you're giving the system away,
and you want them to start with a new system.
You're selling the system, you want
them to start with fresh factory default settings.
It could be a troubleshooting method.
If something's severely wrong with your system,
you've tried everything, nothing's working,
and you can't get this to fix, then
this could be a last resort troubleshooting option.
The important thing to keep in mind about a factory default
is that you can't undo it.
Once you do it, there's no turning back.
So it's kind of a risky decision if you think
it may not fix the problem.
So really, you should only do it if you are absolutely
sure that that's the problem.
Just really keep that in mind.
So I'm going to get into it here,
and I'm going to show you that there are multiple defaulting
options that you can choose from.
You don't have to default the entire system, per se.
You can choose from a selection of options.
And I'm to go through each and every one of them
once I'm in that menu.
Let's get to that menu.
So we're at the main screen of our 2GIG EDGE alarm system.
We're going to press the small settings icon, the gear icon,
in the bottom right corner.
And then we're going to enter in our installer code.
We have to do this code to get to the factory defaults menu.
We can't use our master code.
So we're going to do 1 5 6 1.
And that's the default installer code.
And so now we're into the Settings menu here.
And where we want to go, we want to go to Installer Toolbox
at the bottom.
I'm kind of surprised they put that kind of low there.
Installer Toolbox is a pretty prominent option.
You'd think that would have been more towards the top.
But you do have to scroll a bit to get to it.
You're on the Installer Toolbox right here.
And you see that we have Restore Defaults.
Now, this is where the action is going to be.
So you see we have different types of defaulting right here.
And so right now, they're all disabled.
They're all toggled gray.
If I press one of them, then you'll see it--
I pressed it twice.
But if I press it once, then you'll
see that it toggles green.
And that one's going to be defaulted.
So right now, if I were to click the Restore button,
then Confirm, then it would restore sensors and zones.
So I'm going to tell you what each of these
means just so you know what you're getting out of a factory
default.
Sensors & Zones, that's going to clear out every sensor
and zone, like everything you've enrolled with the system,
not necessarily Z-Wave devices--
that's a different type of default--
but if you enroll door and window sensors,
a glass breaks sensor, a motion sensor, temperature sensor.
It's like anything that enrolls as a traditional RF sensor,
traditional wireless RF sensor, that's going to be reset.
Or even if you had a hard-wired sensor set up with the system,
using a wired to wireless converter,
that would also be taken out.
So whatever zones you set up, that's
what is going to be default. So we'll turn that one on.
Console, that's going to change just miscellaneous settings,
like delay timers, just whatever is inside the system,
maybe account numbers as well, it's
going to-- just like whatever various settings
that you have on the panel that don't really
fit into the other one.
This is kind of like the catch-all category.
It's going to reset them back to their default,
and you're going to have to pretty much reprogram
your system.
You're going to have to go into programming
and reset everything up.
So that's one thing to keep in mind with Console.
With Users, what it's going to do,
it's going to reset the master code to its default of 1 1 1 1.
It's going to default the installer
code to its default of 1 5 6 1.
And it's going to clear out any added user code.
If you added another user code just
for maybe your spouse to get in or your child to get in,
they have their own code, they're not
going to have a code anymore.
You're going to have to reset that up.
So every code's going to have to be reconfigured.
You reconfigure your master code, that's a security risk.
And you don't necessarily reconfigure the installer code
because keeping that as the default's good for getting
into programming, and you can't disarm with the installer code.
But anyway, that's what Users will do.
It will go and factory-default from that perspective.
So then we have Z-Wave.
That's it's pretty obvious.
It's going to clear out the Z-Wave network.
You're going to have to re-enroll
all your Z-Wave devices, automation devices, lights,
locks, thermostats, that type of deal.
You're going to have to go and set them up again.
They're going to be cleared from the system.
Now, Network.
That's going to deal with the IP, the Wi-Fi connection,
internet connection of the panel.
You're going to have to set the panel back
up with a Wi-Fi network.
It's not going to be connected to Wi-Fi.
Now, this can be a bit misleading
because it actually doesn't affect cellular communication
for the panel.
The 2GIG EDGE has a cellular communicator built inside.
That's going through alarm.com.
That's configured through alarm.com.
So if you reset the network, it's
not actually going to affect that cellular communication.
You're going to have to work with your monitoring
company about that.
So that's what networks can do.
It's really only affecting the IP focus.
It's not doing the cellular-based stuff.
So the last one we have here is IP Cameras.
Now, if you're taking advantage of the advanced feature
of the 2GIG EDGE, where you can have IP cameras live-streamed
on the panel, you can actually view your camera stream
on the panel.
Qolsys also does this, but it was also brought to the EDGE.
What that's going to do it's going
to clear out any IP cameras that you
have associated with the EDGE.
You're going to have to re enroll them, get them set up
again, so that way you can stream them
from the panel that's going to be taken away.
So those are all the types of restores you can perform.
Right now, we have all of them selected.
We're going to do a full default and default everything.
So you see that we have the Restore button
in the bottom right corner here.
If we press that, it's going to give us a confirmation.
This is kind of like the warning message here,
do you want to restore these settings to the factory
defaults?
And this is your last chance to cancel.
But once I click this button, it's going to go into effect.
And then there's no turning back.
I can't undo the default.
So we're going to press the button again
because I wasn't fast enough, and we're going to press
the red Restore button.
And then we're going to see that it's restoring settings.
So let's watch that happen.
That was pretty quick, actually.
So the settings have been restored to factory defaults.
So it does give us the confirmation.
And then we press OK, it sets everything back to off.
But we performed the default.
And now we can return Home.
We'll just use the upper right corner here--
Disarmed.
Ready to arm.
--until we get back to the home screen of the EDGE
and its friendly voice.
So that is how you perform a factory default for the 2GIG
EDGE security system.
If you have any questions about the 2GIG EDGE
or about alarm monitoring services,
send an email to support@alarmgrid.com.
If you found this video helpful, make
sure to give it a thumbs up below to like the video,
and remember to subscribe to our channel
for updates on future videos.
We hope you enjoyed the video.
Thank you.