Hey guys, this is Rolando from ReveMoto.
So, today I'm going to be doing a removal and installation of a
2017 Toyota Corolla side view mirror.
If you guys like this video, go ahead and like and subscribe to our
channel. Turn on that push notification, and also,
hit that like button! If you guys need any pre-painted
auto body parts, go to ReveMoto.com, your pre-painted auto body parts store.
This is also the place you can buy these side view mirrors painted,
color matched, and ready to go.
So, let's get started on this installation.
All right, first things first, we gotta open the door.
All right, once you remove these screws,
the screw right here [behind the door handle], the screw down here [near armrest]
and also pop that armrest cover, and then, pry up the main control panel, and
unplug the wires, and then go over here take off the [small triangular] cover,
and then also, disconnect the [wiring] plug
and what we're going to be removing is this right here, a little cap.
Get a flathead screwdriver just like this. Right here
there’s a little groove—just insert the flathead and pop it right out.
Underneath, you're gonna need a Phillips screwdriver.
So, get a Phillips screwdriver like that and take this [screw] off
If you guys look right here, there’s a slot on the door handle.
You have to take that off because there's a bolt under it.
So again, use a flathead screwdriver [You can also use a plastic trim tool]
The door panel is mostly clips, so if you pull it gently, it should pop right off.
All right so again Phillips screwdriver,
go ahead and remove this screw [securing the door handle trim].
It’s hard to get out but looks like this. And, there's another longer Phillips screw in there.
That bolt looks just like this,
but it's all the way in there so we're not gonna take it off. But it is loose
and then go ahead and get a flathead and try to pry up the the window control panel.
Be gentle so you don’t damage the control panel or the door panel itself.
[You can use a plastic trim tool]
This section right here lifts up too—just pull it up.
There’s a prong right here. Just lift it up, and it should come right off.
And right here too, just lift it up like that.
Take the control panel connector off from the side.
If it's hard to remove, just use a flathead screwdriver to help pry it out.
and it's alright should come right off
All right Now, go ahead and remove this cover [triangular cover near the side view mirror] right here
It’s very easy—just pull it off,
and just unplug the connector. So now you can actually take off the [door panel].
You gotta grab it by an angle right here, grab it from the bottom corner and pull it with some force.
Just let it hang like that.
Now, if you guys go to the side view mirror, there are three 10mm bolts—one, two, three.
Let's go ahead and take that off don't unplug it [the wiring] in case the mirror falls.
and these are the bolts you're taking off.
Now, hold the mirror from the outside with one hand, and then unplug the wiring.
To unplug, press on the clip in the front, and then unhook it.
and now well there's a tab right here, press down on it, and then now you can unhook it
and there's your mirror so there's also a tab right here on the top right here
[small plastic tab located at the upper-right section of the mirror mounting area]
So you take that off. If it didn’t come off,
you can use your hands or a flathead to pull that tab off.
so to install the new mirror, basically go ahead and feed that wire through [the hole]
I would clip it back into place so it doesn't fall
and then line it up
so this clip right here should lock into place.
So if you guys look right here, this thing has to clip into place.
If you're taking it off, press down on it like that
that's why you have that plugged in just in case something like that happens.
And then you line up the holes like that and then you press and it should clip into place.
Here on the side [of the mirror mount], there's like these push pins
and just push those back into place
and if you're push pins are loose just like mine just go ahead
and put it back into place right there so it connects to the side view mirror. There you go.
All right so we're gonna go ahead and install the side view mirror.
Now, we’re going to go ahead and install the screws, don't tighten it too hard.
You just tighten it until it's snug. You don't want to break the mirror
because the little studs, whatever it's hooking up to with these bolts it's made out of
plastic so you don't want to break that. You don't need to tighten it up too much
Once you feel it’s tight, just give it one more small twist—that’s it.
Don't use a power tool because
it's gonna make it too tight and it's gonna break.
So now let's go ahead and install the [door] panel.
Make sure the wire harness is outside,
then snap the panel into place.
There you go and then pull on it. So now go ahead and put the screw in place.
Put that cover in place then right here
Plug up that master switch.
and put this armrest cover back on.
Just like that
and then these screws
okay once you put those screws on here [behind the door handle] and down here [bottom of the door panel]
Put that cover back into place.
Last but not least plug the, they call this tweeter speaker
All right and there you go, your side view mirror is back on.
All right guys so that's how you install a 2017 Toyota Corolla painted side view mirror.
It also works for a 2014-2017 model.
If you guys like this video go ahead and like, and subscribe to our channel.
Turn on that push notification and also hit that like button.
If you guys need any prepainted auto body parts just like this one.
There's a link down below.
Also go to revemoto.com your pre-painted auto body part source. Thank you