Find the slope of the line that goes through the ordered
pairs 7, negative 1 and negative 3, negative 1.
Let me just do a quick graph of these
just so we can visualize what they look like.
So let me draw a quick graph over here.
So our first point is 7, negative 1.
So 1, 2, 3, 4, 5, 6, 7.
This is the x-axis.
7, negative 1.
So it's 7, negative 1 is right over there.
7, negative 1.
This, of course, is the y-axis.
And then the next point is negative 3, negative 1.
So we go back 3 in the horizontal direction.
Negative 3 for the y-coordinate is still negative 1.
So the line that connects these two points will look like this.
It will look like that.
Now, they're asking us to find the slope of the line that
goes through the ordered pairs.
Find the slope of this line.
And just to give a little bit of intuition here,
slope is a measure of a line's inclination.
And the way that it's defined-- slope
is defined as rise over run, or change in y over change in x,
or sometimes you'll see it defined as the variable m.
And then they'll define change in y
as just being the second y-coordinate
minus the first y-coordinate and then
the change in x as the second x-coordinate
minus the first x-coordinate.
These are all different variations in slope,
but hopefully you'll appreciate that these
are measuring inclination.
If I rise a ton when I run a little bit,
if I move a little bit in the x direction, and I rise a bunch,
then I have a very steep line.
I have a very steep upward-sloping line.
If I don't change at all when I run a bit,
then I have a very low slope.
And that's actually what's happening here.
I'm going from-- you could either view
this as the starting point or view
this as the starting point.
But let's view this as the starting point.
So this negative 3, 1.
If I go from negative 3, negative 1 to 7, negative 1,
I'm running a good bit.
I'm going from negative 3.
My x value is negative 3 here, and it goes all the way to 7.
So my change in x here is 10.
To go from negative 3 to 7, I changed my x value by 10.
But what's my change in y?
Well, my y value here is negative 1,
and my y value over here is still negative 1.
So my change in y is a 0.
My change in y is going to be 0.
My y value does not change no matter
how much I change my x value.
So the slope here is going to be--
when we run 10, what was our rise?
How much did we change in y?
Well, we didn't rise at all.
We didn't go up or down.
So the slope here is 0.
Or another way to think about is this line has no inclination.
It's a completely flat-- it's a completely horizontal line.
So this should make sense.
This is a 0.
The slope here is 0.
And just to make sure that this gels
with all of these other formulas that you might know--
but I want to make it very clear.
These are all just telling you rise over run
or change in y over change in x, a way to measure inclination.
But let's just apply them just so,
hopefully, it all makes sense to you.
So we could also say slope is change in y over change in x.
If we take this to be our start and if we
take this to be our end point, then we
would call this over here x1.
And then this is over here.
This is y1.
And then we would call this x2 and we
would call this y2, if this is our start point
and that is our end point.
And so the slope here, the change in y, y2 minus y1.
So it's negative 1 minus negative 1,
all of that over x2, negative 3, minus x1, minus 7.
So the numerator, negative 1 minus negative 1,
that's the same thing as negative 1 plus 1.
And our denominator is negative 3 minus 7,
which is negative 10.
So once again, negative 1 plus 1 is 0 over negative 10.
And this is still going to be 0.
And the only reason why we got a negative 10 here
and a positive 10 there is because we
swapped the starting and the ending point.
In this example right over here, we took this as the start point
and made this coordinate over here as the end point.
Over here, we swapped them around.
7, negative 1 was our start point,
and negative 3, negative 1 is our end point.
So if we start over here, our change in x
is going to be negative 10.
But our change in y is still going to be 0.
So regardless of how you do it, the slope of this line is 0.
It's a horizontal line.