This video is brought to you by Squarespace, the all-in-one platform to build your perfect website.
In this series I go behind the scenes and look at some of the
different crew positions on movie sets and what each of these jobs entails.
If you’ve ever watched any behind the scenes videos on filmmaking you’ve probably seen
this person, holding this contraption.
In this Crew Breakdown video I’ll go over the position in the sound
department of the boom operator, to break down what they do, their average day on
set and some tips which they use to be the best in their field.
The boom operator, boom swinger or first assistant sound is responsible for placing the microphone on
a set in order to capture dialogue from the actors or any necessary sounds in a scene.
They do this by connecting a boom mic, or directional microphone, to a boom pole.
The mic is then connected either with an XLR cable
or wirelessly to a sound mixer where the sound intensity is adjusted to the correct level.
On feature films this mixing is done separately by the sound recordist who heads the department,
and is responsible for recording all the audio and delegating the positioning of the mic
to the boom operator.
However for low budget features, TV shoots, documentaries or commercials, the role of
the sound recordist and the boom swinger is sometimes performed simultaneously by one person.
To get the best possible sound and capture dialogue clearly
the microphone usually needs to be placed as close as possible to the actors.
Since film frames have quite a lot of width to them and see a lot of the location
the best way to get the microphone in close to the action without it entering the shot is to
attach it to a boom pole, with the mic angled downwards and use the length of the boom held
overhead to position the microphone directly above the actors and outside of the top of the frame.
For stationary shots without camera movement this involves finding a position for the boom
and holding it throughout the take. Sometimes for
long documentary interviews this can be done with the help of a stand.
However, for shots which involve camera movement or actors that are moving and talking,
the boom operator is tasked with performing a kind of dance. They need to move tighter
or wider as the camera does, always fighting to get the mic as close
as possible while making sure it never dips into the frame and enters the shot.
If this happens during a take the DP, director or 1st AD will often call out ‘boom’.
While the act of operating the boom mic during filming is their primary responsibility,
there are also some other tasks that boom swingers need to perform.
Dialogue is usually captured by two different types of microphones,
the boom mic, as we mentioned, as well as lapel
or lav microphones. These are small microphones which are strapped directly onto the actors
with a clip or with an adhesive tape. They are usually positioned under clothing near the chest
or throat area so that they will pick up intimate sound but be unseen by the camera.
These microphones are attached to a transmitter. This wirelessly transmits the recorded sound to a
receiver that is then connected to a sound mixer where the audio feed is recorded.
The boom operator is usually responsible for attaching this
lav microphone to the necessary actors.
It’s best practice to always inform and explain how you’ll be attaching the mic to the actor,
as it can be a bit invasive. Experienced actors are aware of this but it’s still
professional to ask their permission before touching them or putting on the lav mic.
The boom operator also assists the sound recordist with any necessary technical builds or changes,
such as switching out batteries or attaching a lock it box for
synchronising timecode onto the camera.
Before we get to what a boom operator does on set and some tips
I’d just like to say thanks to the sponsor of today’s video: Squarespace.
When it came to creating a website for this channel I needed a platform which
was quick and easy to use but also one that provided a good, modern level of design.
That’s why I went with Squarespace.
I post my weekly videos there using Squarespace’s blogging tools and
when I finish them ahead of time I use the scheduling capability to streamline the process.
For anyone looking to get into filmmaking having an up-to-date portfolio is a must,
which you can easily make using Squarespace’s customisable galleries.
So, go to Squarespace.com for a free trial, and when you’re ready to launch,
go to squarespace.com/indepthcine to save 10% off your first purchase of a website or domain.
After arriving on set the boom operator will track down a copy of the shooting schedule
and sides. This lists what scenes are planned for the day
and pages from the script with dialogue for those scenes.
They’ll read the sides to see what dialogue needs to be recorded
and what actors need to be mic-ed up.
They’ll replace the necessary batteries and make sure everything is charged up and ready to go.
The boom operator or the sound recordist may test that their audio feed is getting transmitted to VT
and hand out a pair of headphones and receiver to the director
for them to monitor the sound during takes.
The boom operator will mic up any actors in the scene that have dialogue and prep their
boom setup. This may involve changing their gear, such as using a blimp,
or a ‘dead cat’ as it’s called, to cut out wind noise if they are recording a scene outdoors.
They’ll find out the lens that the camera is shooting with, or take a peek at the monitor
to see how wide the frame is and how close they can position the boom without getting in the shot.
Once ready to record a take the 1st AD will call roll sound, and the sound recordist
will begin recording, then the cameras will roll. The boom swinger will then move the mic
over so that it’s directed at the 2nd AC, who will announce the information on the clapper board and
then give it clap so that the editor has a point where they can sync the sound with the video.
The boom operator will then quickly position the boom above the actors
and be ready to begin recording dialogue.
They always wear headphones while recording which can help them to position the boom
further away, closer or at a different angle to get the best possible sound.
When recording sound the default rule is
to usually capture whatever audio is present on screen.
So for wider shots where multiple actors are in a frame
the boom swinger may alternate and move the boom closer to whoever is speaking,
positioning the mic back and forth as the actors exchange dialogue.
Then for close ups where only a single actor is on screen
they will usually focus only on recording sound for that actor alone.
When the camera switches to a close up of the next actor then their full sound will get recorded.
By doing this they will then have clear
dialogue for both actors which the editor can use at their discretion.
Sometimes if the boom was unable to capture a certain sound effect or a certain line of
dialogue during a scene then they will pull the actor aside between
setups and record what is known as wild sound - sound that isn’t recorded with
any specific video footage but which may be synchronised or used later.
They may also need to record ‘room tone’, a quiet ambient recording of the space
without any dialogue. This can be placed as a layer underneath the dialogue in the
edit to make the cuts more natural and provide a background noise to the scene.
In this case the 1st AD will make an announcement to the set…the crew will awkwardly freeze
so as not to make any noise…and the mic will record about a minute of quiet, ambient sound.
Since any footage where the boom dips into shot will be unusable
one of the most valuable skills for boom operators is to know how wide a frame is.
If you’re starting out, it’s useful to look at the framing on the monitor and find what is called
an ‘edge of frame’. This could be a marker on the set which indicates what is in or out of the shot.
As boom operators become more experienced they’ll begin to learn focal length sizes
and be able to place the boom without needing to look at a frame. For example, if they know
how wide a 35mm lens is then they can imagine its field of view and be sure to stay out of it.
As space on a set can sometimes be limited, it is useful to find the best position to
stand before shooting begins. When finding a position it’s important to be mindful of
how the camera and actors will move and to identify any lights that may cast shadows
or reflective surfaces that will pick up the mic in shot.
Always make sure to never position the boom between a light source
and a character, as it will cast a shadow of the gear in the image.
Adjusting the length of the boom so that it has enough reach, but isn’t overextended will
also save space and mean that it stays out of the way of other crew members, gear or lights.
Boom mics are directional, meaning that they capture whatever sound they are pointed at
most prominently. Any sound behind or off to the side of the mic will be recorded much softer.
Therefore positioning the boom overhead with the mic facing down towards the speaker
is most common.
In a dialogue scene with two people close together the operator may be
able to turn the angle of the directional mic toward whoever is speaking at the time
without needing to move the position of the actual pole.
If the frame has a lot of headroom it is also possible to boom sound from underneath the frame.
However, when recording outside this may sometimes pick up excess aviation
noise if any planes pass overhead, so should be avoided unless it’s necessary.
If you’ve ever operated a boom during a long scene you’ll know
that holding it in an awkward position gets surprisingly heavy surprisingly quickly.
The solution is to either spend more time at the gym or find positions that better
mitigate the weight of the mic pole, such as resting it on a shoulder or on the head.
I hope you enjoyed this episode of crew breakdown.
If you’re looking for something to wear on set you may be interested in my merch
which features a boom operator in action.
If you would like me to continue this series then please give the video a
thumbs up and let me know in the comments what other crew you’d like to see featured.
Otherwise, until next time, thanks for watching and goodbye.