(upbeat music)
Hi, I'm Agent Schroder, and today I'm going to set up
and install the Swann Enforcer 8-Channel 4K DVR System
a video surveillance system for indoor and outdoor use.
Here's what you'll need.
The Swann Enforcer 8-channel 4K DVR System,
a TV, or monitor with an HDMI input.
I'll be using this LG 27-inch UltraGear monitor
a smartphone with the Swann Security app installed.
For this, I have the Samsung S22-plus,
a drill, various sizes of drill bits, a hammer
if mounting the camera to drywall, brick or masonry,
a Phillips head screwdriver, and electrical tape.
There are a lot of steps to get the system up and running
so feel free to pause and continue the video as needed.
This system includes four cameras, a two terabyte DVR, cables,
and mounting supplies.
If the cables aren't long enough for your installation,
Swann offers a 100 foot BNC extension cable sold separately.
Before running any cables and mounting of the cameras
it's best to get the DVR set up and the cameras connected
to verify everything's working.
All right, let's get started.
Plug the short cable coming from the camera
into the video and power cable.
The video cable has the purple end
and the power has the red end.
Connect one of the four ends of the power splitter
into the power end of the video and power cable.
Repeat these steps for the rest of the cameras.
Now, plug the camera power adapter
into the end of the power splitter
and then plug the adapter into an outlet.
The lights on the cameras should flash one time.
This means they're getting power.
Now, connect the video ends to the camera inputs on the DVR.
Make sure that you twist the connection to lock it in place.
Next, we'll connect the monitor.
Plug the HDMI cable into the DVR and into the monitor,
and turn it on.
Next, connect an ethernet cable to the port
on the back of the DVR and the other end into your router.
This is how the system accesses the internet
so you can view them remotely.
Find the included mouse and connect it to
one of the front USB ports on the DVR.
Connect the DVR power adapter into the DVR first
and then plug the other end into an outlet.
You'll see the Swann logo on the monitor
and the power and hard drive lights
on the DVR will light up.
After a few moments, the startup wizard will be shown.
Choose the language and click Next.
Then confirm the resolution and click OK.
The welcome screen will appear
along with info on the setup process.
Read through it and click Next.
It'll now ask you to create a password for the DVR.
Type one in using the onscreen keyboard
it has to be at least six characters long
with a mixture of letters and numbers.
If you need help creating one
we have a video that might help.
There's a link in the notes below.
After typing in a password
enter an email address which will be used
for alerts and reset codes in case you forget your password.
Then click Next.
Confirm the language and the video format.
Since I'm in the U.S., I'll keep NTSC intact,
then choose a resolution that's compatible
with your TV or monitor.
Select the time zone along with
your preferred date and time format.
Type a name for your DVR or leave the default
which is what I'll do.
The P2P-ID and QR code are unique to your system.
You'll use this code when pairing the mobile app
to your system.
I'll explain more about that in a bit.
For now, click Next.
The email configuration screen is where you'll enable alerts
and choose which email addresses to send alerts to.
Click on the box to enable email alerts
and leave the setup option set to Auto.
In the sender box, type a name you would like displayed
as the sender on email alerts,
I'm going to leave the default name.
The receiver section will allow you to
add two additional email addresses for alerts to be sent to.
This might be good to have other people
in your home or even a work email address.
You can use the test email button to send an email
to the addresses that are listed to verify functionality.
Then click Next.
This screen is all about syncing the clock.
Click the Update Now button to sync it.
Then click OK, and then Next.
This setting accounts for daylight saving time.
Go ahead and adjust based
on your area and click on Finish, and then, OK.
The system will then check
for any firmware updates and install them.
When it's done, click OK.
Okay, now we're at the fun stuff.
You should be able to see your video feeds.
Make sure that you're getting a feed from each camera,
if you can, you're in good shape.
Before disconnecting everything To install the cameras
let's get the Swann app installed and set up on your phone.
Open the Swann app and sign up for an account
or sign in with an existing one.
After signing in, tap on Pair Device and then tap on Start.
Scan the QR code for your DVR system.
This can be the sticker on top of the DVR
or the one under the main menu
system and information screen.
Once scanned, type a device name
or tap on one of the included locations.
I'll type the Lab DVR, then tap Next.
Now, type the password that you created earlier
during the DVR setup and tap on Next.
The app will connect to the DVR and when it's done
you'll see a congratulations screen, tap on Done.
The next screen will give you information
about the Secure-Plus subscription.
Read through it and if you want it, tap on Join Now.
Now I'm going to tap on Skip, and then Skip again.
The app will then open
on the main screen and show the camera views.
The app is all set up
and you can now view the camera feeds when you're on the go.
All right, now it's time to install the cameras.
Unplug the power cord for the cameras, but not the DVR.
Disconnect the video and power cables
from the DVR and the cameras.
When selecting camera locations
make sure the cameras are protected
from direct sunlight, rain, and moisture.
Depending on your situation
you might wanna place them higher
so your field of view is larger.
This also makes them harder to reach
which is a good thing for security cameras.
Plan a route for the cables
and take measurements
so you can identify potential obstacles.
The included cables are in-wall rated
so you can hide the cables in the walls if you want.
Once you've figured out the path for the cables
route the cables to the locations,
making sure that the cables will reach back
to the DVR location.
To mount a camera, to drywall, use a stud finder
to see if there will be a stud in the location.
Then hold the camera up to the wall as a template
to mark the holes.
When mounting a camera to drywall without a stud,
brick or masonry, use a 3/16th bit
to drill three pilot holes for the anchors to go into.
If you'll be mounting to wood or studs
use a slightly smaller bit.
The screws will go directly into the holes
without the use of anchors.
One tip when choosing your drill bit
is to hold the actual screw up next to it.
Pick one that allows you to see the threads like this.
If you're not seeing any threads, try a smaller bit.
If necessary, gently hammer the anchors
into the pilot holes,
then align the holes on the base of the camera
with the pilot holes and secure the camera to the surface
with the included screws.
Next, reconnect the video and power cable to the camera.
For a bit of extra protection
and to help prevent accidental disconnection,
wrap the connection points with electrical tape.
Repeat the mounting steps for each camera location.
Back at the DVR location,
connect the video cables back to the DVR
and connect the power connections to the power splitter.
Once all the connections have been made
plug the power supply for the cameras
into an available outlet.
Verify all the camera feeds can be seen on the monitor
and in the app.
Next, you'll need to adjust the camera positioning.
With a Phillips screwdriver,
loosen the various adjustment points on the camera
and point it toward the area you wanna be able to monitor.
Use the app on your phone to verify
that the camera feed is displaying the intended location.
Once you have the camera in the right position,
tighten the screws.
You'll need to do this for each camera.
And there you go.
The Swann surveillance system is up and running
and you can view the camera feeds from a TV or monitor
in the location they're installed at
and on a smartphone when you're on the go.
Hopefully this video was helpful.
If it was, give it a like.
If you have any questions,
leave them in the Comments below
and don't forget to subscribe to our channel
for more Tech Tips from Best Buy.
Thanks for watching.