hi there welcome to the beaten trail and today we are going to upgrade our storage on our razor
to a kimpex rear locking box so we always were happy with the polaris 50 liter but we need a
little more room the polaris size uh is adequate but we can fit a little bit more in this box
and we just got it and they package it nicely and we'll put a link up there so if you're interested
in buying one you can get one and really uh came with some hardware um we are going to use our lock
and ride uh twist downs and we're gonna put those in but here we go we're gonna take the old one out
it's got all the tools in it and we're going to go ahead and do this install so just like
with anything else the everything's pre-drilled except for the bottom mounts but just uh just
don't go super tight on these you just put them in easy because you're going to want to make sure
everything is lined up and if you have a razor or a different model the instructions will tell you
where to drill and what hole to apply uh put the bolts and whatnot so this here we're just going to
go ahead and put the washer for our twist lock uh down on this uh on the outside mount uh the inside
mounts will be protected inside so you don't have to worry about somebody walking off with your uh
with your box but uh the front ones we're just gonna do a test here first make sure
these are good uh obviously the interior ones are not hooked up yet it's a little loose
and on here the marked with a c for charlie they indicate where to drill the holes we spec
them out just in case before we drilled and this is where the bolts going to come through
for the lock and ride so here you can see we're just having those tested out and plopped in just
before we tighten them up to make sure everything fits and then once you get that laid down into the
bed put the back ones in first and then you just have to go to either side and guide them in and
it's actually pretty easy we we didn't need much much tools and as you can see the the tightening
from the inside and it's very cavernous you know you just pretty much tighten these down and we
we get the impression this is not going to bounce out even with a full load of anything
we had one issue where we didn't tighten the polaris 50 liter down to too tight and we had
a little bit of a bounce out but this is really secure and as you can see it's got a waterproof
seal it does have some some corners in there where you can pack some stuff and i think it'll be good
because we can fit more stuff in here and pack it down and as you can see we have some locking
clamps there and you could probably use a cable lock and then there's another one on the frame
there i don't think anyone's going to be getting in there and if they want to they're gonna you
know they're gonna have to cut it so we were asked hey does the one gallon and two gallon gas fit i
don't know if i'd want to go riding with gas on the back but just so you see neither of them fit
uh we will put a chainsaw in there but um there's plenty of room in here we have our jumper pack and
we're going to do a full video of everything that we have in our box just for trail safety and full
preparedness but there's a lot of little crannies in here and we put everything in here and we're
able to stock up uh the full capacity i'll list in the description and uh go ahead and please leave a
comment because this is a good addition to any razer i'd highly recommend it it's lightweight
but sturdy and you'll get a good good amount of storage in there with your tools and it seals well
and it's waterproof and i think you'll be happy so let us know what kind of storage you use on your
razor and put it in the comments we'd love to hear questions and if you have any other suggestions
please drop us a note and please subscribe we'll see you out there on the trail thanks again
you