Hi, DIYers.
This is Michael from Alarm Grid.
And today, I'm going to show you how
to exclude your Schlage Z-Wave door lock from your Honeywell
Lyric alarm system.
And when I say exclude, I also mean clear
the device from the network.
If you have it paired with the system,
this will delete it from the system essentially.
You can also complete this exclusion process
even if you haven't paired the lock with a Z-Wave hub
or controller yet.
This will wipe out any residual Z-Wave data
and make a pairing process easier.
This is important if you wanted to bring it
to a new system, a new Z-Wave controller, maybe a Samsung
SmartThings, a Qolsys IQ Panel 2 Plus.
And whenever you're pairing it, it's
always just a good practice to exclude the device
from the Z-Wave network first.
Sometimes these locks are paired with Z-Wave networks
before leaving the factory for factory testing purposes,
so you never know.
Make it a new lock fresh out of the box
and it still has some residual Z-Wave data in there,
so performing this exclusion process, its generally best
practice.
And this lock follows the same process for inclusion
as exclusion.
You enter in the programming code,
which you have to find by removing the lock's cover.
We actually had to open up the lock
and obtain the programming code.
It's a six digit code and we have it written down here.
And you're going to want to do this with your Schlage Z-Wave
door lock and write down the code--
like I said, it's a six digit code--
and store it somewhere safe.
Because if you have to access it later then
you're going to want to have the code without having
to open the lock back up, which is really inconvenient
and time consuming.
So just save yourself trouble and write down
the program code.
Well, anyway, we're going to focus
on excluding the lock from the Z-Wave network.
Like I said, you don't have to have the lock paired
with a system to do this.
We actually don't have ours paired.
We're going to go through the exclusion process now,
so we're going to turn our attention to the Honeywell
Lyric alarm system.
And now we're at the Honeywell Lyric alarm system
and we're going to put the Lyric into exclusion mode
by choosing automation.
Now we're going to press the down arrow then choose tools.
And we're going to use exclude devices
and the Lyric will enter its exclusion mode.
So now we're turning our attention back
to the Schlage Z-Wave door lock.
The Lyric is in its programming mode.
We're focusing on this top lock today.
And to get the key pad to pair, you just
have to press it a little bit hard there.
So were on the first number 9, 2, 5, 9, 7, 9.
And then we press 0 after entering the programming code
to put it into its inclusion-exclusion mode
to send the signal out to the Z-Wave hub.
So we have on the Lyric here an unknown device
has been excluded.
The reason it's an unknown device
is because we didn't have the lock paired with the network.
It just knows that some Z-Wave device has been cleared,
it's Z-Wave data has been wiped, and now
it's ready to pair with the Z-Wave network.
And just for demonstration purposes,
I'm going to show you how to include it with the network.
Easy process, we just back out here.
And then we go to include devices.
And now that we've cleared the device from the network,
we should have no problem pairing it.
So we're going to just do the same thing entering
the programming code 9, 2, 5, 9, 7, 9.
That's our programming code.
We enter in 0 and it sends the Z-Wave signal to the panel.
It says the device has been found.
We're just waiting for the inclusion process
to fully complete here.
[BEEPING]
And it shows the lock has been added.
It got put to node 242.
I'll give you a quick demonstration of how it works.
We can back out to the locks menu here
of the main Z-Wave menu where we choose various Z-Wave devices.
And we can choose locks.
And we see lock 242 and it's currently in a locked state.
We're going to just press the button here.
And as you can see, the lock is working properly.
So that's how you would exclude a Schlage Z-Wave door
lock with your Honeywell Lyric alarm system.
And then we showed you how to include
it, which is usually what you would
do after excluding the lock.
If you found this video helpful, make
sure to give it a thumbs up below to like the video.
And remember to subscribe to our channel to get updates
on future videos.
And if you have any questions about Schlage Z-Wave door locks
or about alarm monitoring in general,
feel free to send us an email at support@alarmgrid.com.
We're always happy to help.
Hope you enjoy the video.
Thanks.