Unwrapping the new Front Subframe and placing it onto some floor Jacks
Preparing the Subframe for the Internal Coating by Eastwood Garage
Begin to apply the Internal Spray Coating
Remove the Tape from the Front Subframe
Start Sanding the Front Subframe down
Flip the Frame over and sand the other side
Clean the Subframe off with Acetone
Hang the Front Subframe up and start Priming it
Hang the Front Subframe up inside and start Painting
This is going to take a while, feel free to skip ahead to 07:33
Start Painting the next coat on the Front Subframe
Once the Subframe is ready get the car ready
Jack the Subframe in place and strap the rear in to pull it up
Once it is in place install the Solid Bushings and Bolt the Subframe to the Firewall
Use the Summit Racing Alignment Pins to align the Subframe
Tighten the Global West Body Mount Bushings to the Firewall
Install the Driver's Side Body Mount Bushing
Install the Passengers Side Body Mount Bushing
Here's what the Subframe looks like bolted to the Car!
Subscribe to see more videos like this and thanks for watching!